The unit is a single door multifunction standalone access controller, which is an ideal choice for door access for shops, households, commercial and.industrial applications, such as, factories, warehouse, laboratories, banks and prisons Feature: Waterproof degree: IP68 With Anti-theft alarm output for external alarm device With built-in-anti-theft equipment Support enrolling cards continuously Perfect design, with backlight and fashion silver finish Waterproof design for outdoor use Strong standalone function device can be used as WG26 reader alone Capacity: 2000 user's cards, 2000 codes Access ways: Cards, code, card + code Lower power: Static current less than 30mA Support only keypad Users can reset private passwords WG output W26 for card and W34 for codes Use keypad to delete lost cards for safety Short-circuit protect: When relay or alarm output short circuit, it will shut up in 0.1ms Strong Zinc Alloy Electroplated anti-vandal case Full programming from the keypad Backlight keys Adjustable Door Output time, Alarm time, Door Open time Fast operating speed, 20ms with 2000 users Easy to install and program Built in light dependent resistor (LDR) for anti-tamper Red, Yellow and Green LED display the working status Specification: Project Indicators Power Supply 12VDC + 10% Unlock relay 12VDC/2A Electric lock output Max 3A Alarm output Max 20A Output short-circuit protection time Max 0.1ms Effective Cards 2000 Ambient temperature -45-60 degree centigrade Relative humidity 10%-90% RH Password 4 digit PIN code Built-in proximity card reader identify the frequency ID type: 125KHz IC type: 13.56MHz induction card identifying the type ID type: EM or compatible IC type: MF1 or compatible Card reader from ID type: 5-15 CM IC type: 3-5 CM Electric locking interface Relay output or input of optional Open access 1 Doorbell button 1 Door sensor interface 1 Interface to an alarm 1 Add-in Reader Interface 1 WG26 interface Size 118*56*20mm