MultiCode MCS302210 Gate Edge Remote and 50 similar items

MultiCode MCS109950 12/24V Gate Opener Receiver 300/310MHz Stanley 10 Dip Switch Replaces Multi-Code 109930, 109940, Stanley 109931. The Model 109950 1-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver?s Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver. The Model 109950 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters. The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator?s radio activation terminals. The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver?s output will activate, triggering the gate operator. The Multi-Code 109950 by Linear Corporation MCS109950 radio receiver is directly compatible with the following model remotes to control one device: Challenger: MC1010, MC1020, MC4210, MC4220. Carper: CX-300 Digi Code: 5010, 5060, 5030, 5040, 5070. Heddolf: M219, M220. Multi-Code: 1083, 3060, 3070, 3083, 3089, 4120, 4140. Multi Elmac: 3089. Chamberlain: 300MC. Not all compatible models may be listed Product Features: Activates one gate or garage door opener Dual frequency can be set to either Multi-Code 300MHz or Stanley 310MHz mode by internal jumper Auto voltage sensing no jumper needed to set operating voltage Ideal for use on gate openers Antenna with 3 ft. coaxial cable and bulkhead connector are included Optional remote antenna mounting kit for maximum range sold separately One-Year manufactures warranty Product Specifications: Power: 12-30 Volts AC or 10.5-30 Volts DC Frequency: 300MHz or 310MHz jumper selectable Contacts: One N/O rated at 1 Amp 30 Volts Codes: 1,024 (set by 10 dip code switches) Dimensions: 5.5 x 1.5 x 3.625 inches