Mini Heading Lock Gyro Gyroscopes GY500 AVCS and 24 similar items

Mini Heading Lock Gyro Gyroscopes GY500 AVCS For RC Helicopter Car Boat Features: - Size: 201912mm - Shell: high precision CNC produced aluminum alloy out shell. - Weight: only 10g - Application: suit for rc car, rc boat, rc helicopter (like 450 helicopter) direction locked, anti-drift Single-axis Heading Lock Gyroscopes(GY500) Function Instruction: 1. avcs system: the avcs system automatically eliminates the rudder offset caused by wind or other weather factors and various attitudes of the helicopter, making the rudder easy to handle, suitable for 3D fancy flight. 2. gyro sensor: the new piezoelectric sensor can effectively reduce rudder offset in flight. 3. digital servo (DS mode): compatible with digital servos when using DS mode, fully compatible with the high-speed response of digital servos. 4. remote control switch gyroscope sensitivity and operation mode: the sensitivity of the gyroscope can be adjusted by the remote control, and the operation mode of the gyroscope (lock mode or normal mode) can be switched. When the rudder is deflected by the crosswind, the gyroscope will resist the offset of the rudder. At the same time, the gyroscope calculates the offset angle and continuously sends the control signal to resist the crosswind, so even the crosswind When the helicopter is continuously attacked, the rudder will still not shift. In other words, the gyroscope automatically corrects the tail rudder offset caused by the crosswind. When the helicopter is doing the rotation, the tail rudder opportunity swings according to the angular velocity of the body rotation. When the helicopter stops rotating, the tail rudder opportunity determines the position that should be stopped. This is the automatic offset function. Reverse switch: Switch the control direction of the gyroscope. The correct switching should be made according to the direction of rotation of the main rotor of the helicopter and the direction of the tail rudder link. DS mode switch: Digital servo mode switch. When using the digital servo, please cut the DS mode switch to the ON position. When using the general servo, please cut it to the OFF position. If it is turned to the ON position, it may cause the servo to burn. (The output signal format is different) Control delay adjustment knob: adjust the operating speed of the tail control signal. If you use a slower steering gear and find that the helicopter's tail rudder will produce tracking, turn the knob clockwise to increase the delay time to eliminate the tracking phenomenon. If the tail rudder uses a high speed servo, such as a digital servo, adjust the knob to the 0 position. Steering gear maximum stroke adjustment knob: Set the maximum stroke amount of the tail rudder servo. Fully steer the rudder stick to the left and right. Adjust the knob so that the stroke of the tail rudder does not exceed the maximum range of the tail pitch sleeve. Turn the knob clockwise to increase the stroke. Connection: The sensitivity channel interface is connected to the receiver's sensitivity channel (usually CH5), which can be used simultaneously to switch the sensitivity and mode of the gyroscope (lock mode or general mode). Since the connector has only a single-core signal line, do not pull it hard to avoid disconnection. The rudder channel interface is connected to the rudder channel (CH4) of the receiver. The tail rudder servo interface is connected to the tail rudder servo. Package include: 1x Mini Heading lock Gyro GY500 ?Note: other accessories not included, Shipping 1.If you need to buy in bulk, please contact, we will reply in 24 hours. 2.We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control. 3.Usually product Reaches after about 12-45 business days depending on destination. If you have not received your shipment within 45 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Refund or resend product will be offered if item still not received. 4.We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We ask you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. It is impossible to address issues if we do not know about them!