Omron S8VS-06024 24V DC 2.5A Industrial and similar items

Omron S8VS-06024 24V DC 2.5A Industrial Automation Power Supply We gladly ship worldwide*! Omron S8VS-06024 24V DC 2.5A Industrial Automation Power Supply Standard Model , Input 100 to 240 VAC , 60 W , Output 24 V 2.5 A S8VS Switch Mode Power Supply 60W Model 24V DC 2.5A output input 100-240V AC 50/60Hz Power rating 60 W Efficiency 84% TYP. 100 VAC input) 83% TYP. 200 VAC input) Rated input voltage 100 to 240 VAC Allowable-input voltage variable range 85 to 264 VAC 80 to 370 VDC Note at DC input The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC). Frequency 50/60 Hz (47 to 450 Hz Single-phase) Rated input current 1.3 A TYP. 100 VAC input) 0.68 A TYP. 200 VAC input) Harmonic Current EN61000-3-2 Leakage current 0.5 mA Max. (At 100 VAC input) 1.0 mA Max. (At 200 VAC input) Inrush current 14 A TYP. 100 VAC input (For cold start at 25 CEL)) 28 A TYP. 200 VAC input (For cold start at 25 CEL)) Rated output voltage 24 VDC Output voltage variable range -10 to +15% (With V. ADJ) (The output voltage may increase beyond the allowable voltage range (up to +15% of the rated voltage) depending on the operation of the output voltage adjuster (V.ADJ). When adjusting the output voltage, check the output voltage of the Power Supply and be sure that the load is not damaged.) Ripple 2%(p-p) Max. (Under the rated I/O conditions.) 70 mV Max. (Under the rated I/O conditions.) Static input variation influence 0.5% Max. (At 85 to 264 VAC input, 100% load) Static load variation influence 1.5% Max. (At rated input, 0 to 100% load) Ambient temperature variation influence 0.05 %/CEL Max. Rated output current 2.5 A Start up time 620 ms TYP. VAC input) 400 ms TYP. VAC input) Hold time 34 ms TYP. VAC input 158 ms TYP. VAC input Overload protection 105% to 160% of the rated output current Inverted L voltage drop, Intermittent operation, Automatic reset Overvoltage protection Operated at 130% Min. of the rated output voltage, Shut-off Resetting: Reset the power by turning it back (OFF time: at least 3 min) Overheat protection No Maintenance forecast monitor output No Total run time monitor output No Undervoltage alarm output No Power failure alarm output No Parallel operation No (However, backup operation is possible; external diodes required.) Series operation Yes (Up to 2 Power Supplies with external diode) Remote sensing function No Applicable standard (UL) Standard No.: UL Listed: UL508 (Listing, Class 2: Per UL1310), UL UR: UL60950-1 (Recognition) Applicable standard (CSA) Standard No.: cUL: CSA C22.2 No.107.1 (Class 2: Per No.223), cUR: CSA C22.2 No.60950-1 Applicable standard (EN) Standard No.: EN50178, EN60950-1 Applicable standard (EC Directive (EMI)) EMI: EN61204-3 Class B Emission Enclosure: Conforms to EN55011 Group 1 Class B Emission AC mains: Conforms to EN55011 Group 1 Class B and based on FCC Class A EMS: EN61204-3 High severity levels Applicable standard(VDE) Standard No.: VDE0160, VDE0805 Teil 1 File number: Applicable standard(SEMI) F47-0200 (200 VAC input) Ambient temperature Operating: -10 to 60 CEL Storage: -25 to 65 CEL (with no icing or condensation) Ambient humidity Operating: 25 to 85% Storage: 25 to 90% (With no icing or condensation) Dielectric strength Between all inputs and all outputs/alarm outputs: 3 kVAC for 1 min (Detection current: 20 mA) Between all inputs and PE terminals: 2 kVAC for 1 min (Detection current: 20 mA) Between all outputs/alarm outputs and all PE terminals: 1 kVAC for 1 min (Detection current: 30 mA) Between all outputs and all alarm outputs: 500 VAC for 1 min (Detection current: 20 mA) Insulation resistance Between all outputs and all inputs/ PE terminals: 100 MOhm Min. (at 500 VDC) Vibration resistance 10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours Shock resistance 150 m/s**2, in each 6 directions 3 times Output indicator Yes (color: green) Heat radiation Natural air-cooling Construction Covered type Terminal type Screw terminal Mounting type DIN Rail mounting type Weight 330 g Max. Don't forget to place your bid. on this sale you agree to the following terms: Shipping Terms: Buyer pays all shipping costs. Shipments made to California must include 8.0% sales tax unless we are provided with a valid resale certificate. We reserve the right to ship with Fedex ground, USPS and any other carrier in the best interests of the buyer and seller. The Parcel post option is only available to alaska, Hawaii, and US territories only. If you select parcel post and you live in the lower 48 states you package may be sent by another carrier and/or an additional shipping amount may be required. Payment Terms: Payment is to be made by PayPal in U.S. funds. Please contact us if you have any questions about's recent payment policy change. Payment is to be received within ten days of close of auction. Should payment not be received within ten days the item will be re-listed and high bidder will forfeit. No personal checks will be accepted. International Terms: (These terms only apply to international shipments.) Buyer is responsible for all brokerage, customs, and or duty charges. *Not all items are available for international shipment due to import/export regulations. In the event that we are unable to ship to buyers country, buyer will receive a full refund. Payment must be made in US Dollars. Money must be drawn against a US bank. Warranty Terms: No warranty nor guarantee is expressed or implied regarding: usability, functionality, merchantability, or cosmetic appearance of the item(s) in auction. What you see in the picture(s) is what you get nothing more nothing less. Test results of item(s) in auction are described to the best of our ability in the ad. The results of all tests that are performed are disclosed in the ad. Items sold as "Untested" are simply that we have been unable to test the item(s) due to missing cables/adapters/toner cartridge/ksu/etc, lack of time, or other restrictions, Such as when we sell a laptop that we don't have an AC adapter for. Our only guarantee is that you will receive the make and model listed in the ad. The maximum liability of BetterBizequipment(the seller) is the high bid of the auction. Return Terms: Returns are only allowed under cases of gross misrepresentation in the ad, such as when we describe a monitor as a fax machine. Such claims of misrepresentation must be filed within three days of receipt of shipment. Betterbizequipment reserves the right to replace the item(s) or refund the high bid solely at our discretion. Item must be returned in the original box and packaging. Bidder must request a RMA number before returning item(s). Packages returned without a RMA number will become property of Bbetterbizequipment ten days after receipt unless buyer has paid return shipping within the ten day period. Shipping Damage Terms: Seller will file a shipping claim(s) upon behalf of the buyer with common carrier in the event shipment(s) is/are damaged during shipping, in most cases. Not retaining the original box and packaging may affect the carriers decision on a claim. Seller will commence filing the claim once buyer has filed the damage report with the seller. Buyer must notify seller within 48 hours of receipt of a damaged shipment. Medical Terms: The following terms apply to any and all medical items or any item offered for sale in any medical category or any item that deems these terms are applicable to: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. The buyer will not hold the seller, or the item's manufacturer responsible for the appropriate or inappropriate use of this device either by the user or a third party. Once purchased, it is the sole responsibility of the purchaser to assume any and all liability from the use of this device. Please note before bidding that any medical equipment purchased should be completely tested by a qualified biomedical technician prior to being put into service. Jason Rydell in San Diego, CA, USA Phone: 619-519-0869 Online Business name: Betterbizequipment If any provision of this sale Contract is held unenforceable, All remaining provisions of this Contract shall remain in full force and effect. Copyright 2011 Betterbizequipment - All Rights Reserved. sale Wizard 2000 - The Complete Auction Management Software Solution