SL-312-TM S type load cell with connection links could allow you to weigh products vertically Horizontally. Similar to a traditional crane scale, our SL-312-TM Scales will allow secured connection points from the top bottom of the load cell. Such a system is used in both vertical horizontal weighing applications. Since the indictor carries a peak hold function you can use this system for testing applications as well. Indicator specification:; Stainless Steel casing ( IP67 ) AC adapter included ( Battery included ) Multiple weighing units: (lb/kg); (g/oz/lb:oz) available on LCD only Gross/Tare/Pre-Set Tare/Zero Multiple Hold functions Count weighing Accumulation weighing Overload / Underload alarm Power saving mode Automatic date and time update Ability to modify gravity based on different geographical locations 100% manual zero range setting Automatic error warning alarm Splash-proof keyboard and display Connects to a remote display Connects to multiple printers NTEP approved for 5,000 divisions Displays up to 50,000 graduations 1” LCD display with backlight Mounting bracket and Hardware (included) Operates on 110V AC adapter (included) Full Duplex RS-232 Serial Port Drives up to 6 x 350 ? ohms load cells Load cell Specification: Rate output: 3.0mV/V Load cell resistance: 385 ? OHMS load cell cable: 50-10k lbs : 20 ft / 6m load cell cable: 15k-20k lbs : 40 ft / 12m Safe Overload: 150% F.S Destructive load: 300% F.S Excitation Recommended: 10-20V AC/DC Operation Temperature: -4 F - 104 F Construction Load cell: Alloy Steel