10FT 4'' Straight Square Steel Light Pole and similar items

Specifications: Conforms to ASTM-A 500 Grade B: Minimum Yield Strength of 46,000 PSI. Finish: Textured Architectural Bronze Powdercoat Finish, Baked to Ensure Maximum Paint Adhesion, Hardness and Durability. Anchor Bolts: Anchor Bolts are Included, Sized Based on Pole Data Charts for the Selected Pole Size. Hand Hole: Cast Iron Reinforced Hand Hole and Cover with Ground Screw. Base Cover: Poles are Provided With a Two-Piece Formed Steel Base Cover that is Easily Assembled and Fitted Over Pole Base. Pole Length: Poles are Available in Standard Lengths as Shown in the Order Matrix. Poles can be Custom Cut to Order. Consult Factory. Mounting Options: Standard Length Poles Include 2?" OD Tenon, Side Drilled 4@90 Degrees, Polycarbonate Top Cover and Hole Plugs for Unused Drilling Locations. Cut To Order Poles can be Side Drilled for 2@180 Degrees or 4@90 Degrees, Includes Polycarbonate Top Cover and Hole Plugs for Unused Drilling Locations. Cut To Order Poles May Also Be Ordered With 2?? OD Tenons for Use With Post Top Decorative Luminaires, Flood/Area Slip Fitter Fixtures, or Any of a Wide Variety of Pole Top Mounting Accessories. Our standard equipment is to make a top adapter with 2.5 inches. There is no opening on the top of the light pole. If ARM installation is needed, the top adapter shall be removed and holes shall be opened on the wall of the light pole. Finally,seal the top with a plastic rain cover. Additional Details ------------------------------ Product description: Specifications: Conforms to ASTM-A 500 Grade B: Minimum Yield Strength of 46,000 PSI. Finish: Textured Architectural Bronze Powdercoat Finish, Baked to Ensure Maximum Paint Adhesion, Hardness and Durability. Anchor Bolts: Anchor Bolts are Included, Sized Based on Pole Data Charts for the Selected Pole Size. Hand Hole: Cast Iron Reinforced Hand Hole and Cover with Ground Screw. Base Cover: Poles are Provided With a Two-Piece Formed Steel Base Cover that is Easily Assembled and Fitted Over Pole Base. Pole Length: Poles are Available in Standard Lengths as Shown in the Order Matrix. Poles can be Custom Cut to Order. Consult Factory. Mounting Options: Standard Length Poles Include 2?" OD Tenon, Side Drilled 4@90 Degrees, Polycarbonate Top Cover and Hole Plugs for Unused Drilling Locations. Cut To Order Poles can be Side Drilled for 2@180 Degrees or 4@90 Degrees, Includes Polycarbonate Top Cover and Hole Plugs for Unused Drilling Locations. Cut To Order Poles May Also Be Ordered With 2?? OD Tenons for Use With Post Top Decorative Luminaires, Flood/Area Slip Fitter Fixtures, or Any of a Wide Variety of Pole Top Mounting Accessories. Our standard equipment is to make a top adapter with 2.5 inches. There is no opening on the top of the light pole. If ARM installation is needed, the top adapter shall be removed and holes shall be opened on the wall of the light pole. Finally,seal the top with a plastic rain cover.