All servers listed here have been booted all the way into Linux Mint and ran a few projects from Folding At Home Distributed Computing
Each listing for a individual server in this listing is typed up using the individual server.
Servers are SOLD AS IS
NO Rails NO Hard Drives NO Caddies NO Continued Support
Free Shipping Lower 48


INXI Printouts follow at end of listing

1) USE838N9JQ HP Proliant DL360 G5 Single Quad Core XEON E5405 2.0 GHz 8 GB no HD no Caddies (6 Bays)
2 Embedded GB Ethernet Ports plus 2 PCI GB Ethernet add-on ports 1 Management Port iLO2 2 Power Supplies DVD-RW and 2 Grille Bay Fillers

2)

USE838N9JQ 

mint:~$ sudo inxi -F -m -s
System:    Host: mint Kernel: 4.15.0-54-generic x86_64 bits: 64 Desktop: Cinnamon 4.2.3 Distro: Linux Mint 19.2 Tina 
Machine:   Type: Server System: HP product: ProLiant DL360 G5 v: N/A serial: USE838N9JQ 
           Mobo: N/A model: N/A serial: N/A BIOS: HP v: P58 date: 08/03/2008 
Memory:    RAM: total: 7.79 GiB used: 856.0 MiB (10.7%) 
           Array-1: capacity: 64 GiB note: check slots: 8 EC: Single-bit ECC 
           Device-1: DIMM 1A size: 1 GiB speed: 667 MT/s 
           Device-2: DIMM 2C size: 1 GiB speed: 667 MT/s 
           Device-3: DIMM 3A size: 1 GiB speed: 667 MT/s 
           Device-4: DIMM 4C size: 1 GiB speed: 667 MT/s 
           Device-5: DIMM 5B size: 1 GiB speed: 667 MT/s 
           Device-6: DIMM 6D size: 1 GiB speed: 667 MT/s 
           Device-7: DIMM 7B size: 1 GiB speed: 667 MT/s 
           Device-8: DIMM 8D size: 1 GiB speed: 667 MT/s 
CPU:       Topology: Quad Core model: Intel Xeon E5405 bits: 64 type: MCP L2 cache: 6144 KiB 
           Speed: 2001 MHz min/max: N/A Core speeds (MHz): 1: 2001 2: 2009 3: 2000 4: 2002 
Graphics:  Device-1: Advanced Micro Devices [AMD/ATI] ES1000 driver: radeon v: kernel 
           Display: server: X.Org 1.19.6 driver: ati,radeon unloaded: fbdev,modesetting,vesa resolution: 1600x900~60Hz 
           OpenGL: renderer: llvmpipe (LLVM 8.0 128 bits) v: 3.3 Mesa 19.0.2 
Audio:     Message: No Device data found. 
Network:   Device-1: Broadcom and subsidiaries NetXtreme II BCM5708 Gigabit Ethernet driver: bnx2 
           IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: 00:22:64:0b:e5:a4 
           Device-2: Broadcom and subsidiaries NetXtreme II BCM5708 Gigabit Ethernet driver: bnx2 
           IF: enp5s0 state: down mac: 00:22:64:0b:f5:0c 
           Device-3: Broadcom and subsidiaries NetXtreme II BCM5706 Gigabit Ethernet driver: bnx2 
           IF: enp20s4 state: down mac: 00:21:5a:d3:a4:64 
           Device-4: Broadcom and subsidiaries NetXtreme II BCM5706 Gigabit Ethernet driver: bnx2 
           IF: enp21s5 state: down mac: 00:21:5a:d3:a4:66 
Drives:    Local Storage: total: 14.59 GiB used: 81.2 MiB (0.5%) 
           ID-1: /dev/sda type: USB vendor: SanDisk model: Cruzer Glide size: 14.59 GiB 
RAID:      Hardware-1: Hewlett-Packard Smart Array E200i (SAS Controller) driver: hpsa 
Partition: ID-1: / size: 3.89 GiB used: 81.2 MiB (2.0%) fs: overlay source: ERR-102 
Sensors:   System Temperatures: cpu: 54.0 C mobo: N/A 
           Fan Speeds (RPM): N/A 
Info:      Processes: 175 Uptime: 5m Shell: bash inxi: 3.0.32 
mint