The XtremeWeather xRET assembly is an integrated design where the connector and the cable are fused in one assembly, making this solution highly resistant to moisture, contamination, and corrosion. The 123-171 is a replacement for the 66-170 and 123-170, and can be used in lieu of standard RET connectors.

– The ONLY IP 68 rated xRet™ connector available today!
– A fused gasket sealed body will eliminate the chance of moisture running down the cable and seeping into the connector.
– Gasket encapsulated contacts and gasket sealed mating face will eliminate the chance of moisture seeping into the connector.

– AISG Compatible: v1.1 v2.0.
– Connectors: 2 x 8 pin, IEC 60130-9 female/male.
– Tightening Torque: 0.5 – 1 Nm (0.36 – 0.73 lb/ft).
– Construction: Shielded, 1 x twisted pair 100 ?/1 MHz, 2 x power supply, 2 x ground, AWM style 20317 I/II, A/B + 20549 + 20233.
– Rated Current: 4 A (power supply) (at 50°C).
– Temperature Range: -40° to +80°C (fixed position).
– Protection Class: IP 68.
– Cable Diameter: 0.3? (8 mm).
– Flammability: VL 1581, VW-1, CSA, FT-1.
– Minimum Bending Radius: one time – 2.4? (60 mm), several times – 4.8? (120 mm).