ANCEL Brand Universal OBD II, EOBD + Can Automotive Car Engine Fault Code Diagnostic Scanner Reader (Model: AD310)

• Classic design, fast scan and clear trouble codes, even a beginner can use this unit to read the error code, find out what the problem is and perhaps fix it. Save money and time.
• Works on MOST 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports English, German, French, Spanish, Finnish, Dutch, Russian and Portuguese.
• Easily determines the cause of the check engine light. I/M monitor readiness test, turn off the MIL (check engine light) as well as view freeze frame data. Read hard (memory) / pending (intermittent) and historic codes and show definitions.
• The AD310 scanner is well built with a large LCD display (128 x 64 pixel) that has white backlight and contrast adjustment, indicates test results directly. No need for Batteries or Charger, gets the power directly from the OBDII Data Link Connector in your vehicle.
• It's equipped with a 2.5 foot long cable and made of a very thick flexible insulator. There are 4 buttons on AD310. The Up and Down button for scrolling the menu, the Enter and Exit button allow for navigation back and entering menu

  ANCEL AD310 AUTOMOTIVE SCAN TOOL

  

  Where's the OBDII interface?

  • The OBD2 port is often under the dash, or under a panel below the handbrake in the centre console.

  How to get started?

  • Simply plug into the OBD II port on your car and turn ignition on and you ready to go.

  Why I can't erase the fault code?

  • The fault causing the fault code to show will need to be repaired first then code can be erased.

  
  NOTE:

  • Works on 12V vehicle battery ONLY
  • Must be 16 PIN OBD II potocol
  

  ANCEL AD310 is a great upgrade from the more basic diagnostic Code Reader. The major function of this scanner is detecting the Engine System, read and clear the error codes. Once plugged into your vehicle's 16pin OBDII DLC, the unit will power up and prompt you to start your ignition. If your vehicle has a Check Engine Light comes on, you can use AD310 scanner to read the error codes, find out what the problem is, and perhaps fix it.
  
  Product Features

  • large easy-to-read backlit LCD screen
  • read and clear diagnostic trouble codes for the check engine light, both generic and manufacturer specific codes
  • view freeze frame data
  • reads live data stream
  • retrieves vehicle information
  

  Code Definition

  • Built-in OBD-II DTC lookup library
  • Shows the code and what the code means directly, don't need to search online
  • After the code was found, it'll show the definition directly by clicking the error code you selected
  

  Unlike other cheap versions, it supports ALL OBDII protocols, including ISO9141, KWP2000, J1850 PWM, J1850 VPW and CAN.

  

  You can use AD310 scanner to make sure the monitor was set before taking it to smog, help you pass the Smog Check easily.

  

  Simple and super easy to use. This little device saves you the trips to your mechanic, lets you decide if it's something you can fix or need more advanced help. Save money and time.