ATR Tile Leveling Alignment System DIY Kit

Tiling made easy with the ATR Tile Leveling

2mm Cross Floors and Walls

In stock - Ship Same Day

Kit Include: 100 Cross Spacers 100 Edge Spacers 50 (Re-Usable) Pre-Assemble Spindle, 10mm socket (1 per customer)(compare at $243.99 other leveling system)

230 sq ft coverage area

Grout spacer 3/32" (2mm) - Tile thickness (1/4 - 3/4) (6mm-20mm) 15/64 - 51/64

You only need 1 cross spacing plate for 4 tiles NOT 4 Clips like every other Leveling System

While every other system require 376 units for 100 pieces of tile ATR require only 117

Very easy to learn and use at any skill level

Advantages of the ATR Tile Leveling

Example of the different between ATR to other leveling system

100 pieces of tile project ATR use total of 117 spacers with approximately cost of $29.99 compare to any other leveling system 376 spacers with cost of $44.00

About 33% saving in money of spacers and over 66% time saving in Labor of saving on installing additional 259 pieces

How to use 3 Easy steps

1. Spread thinset install tile

2. Screw spindle into spacing plate, Slide spindle with spacing plate attached in between two tiles.

3. Tighten spindle clock wise firmly until all four corners are aligned flush.
* Remove Re-usable spindle once tile adhesive is dry.

ATR Leveling System, ATR Plastic, Tile leveling, lippage free, flat surfaces, Leveling System,

Click Here to watch ATR Videos

ATR Leveling System Comparison Chart

ATR Leveling System Questions and Answers

Free or Paid Shipping cost are for the lower 48 states Only. Any order submit not from lower 48 states will be refund and will not be shipped unless extra shipping cost paid. Other state please contact us at flooringsupplyshop.com for shipping cost