Item description for Cavium W&W WWASPBAKT100 HD Video Encoder Decoder Codec Aspen kit WW10000 WW10K

Cavium W&W WWASPBAKT100 HD Video Encoder Decoder Codec Aspen kit WW10000 WW10K

We gladly ship to most countries*!

Cavium/W&W Communications WW10K WW10000 HD Video Encoder Decoder Codec Aspen Development Kit for WW10K Chipset WWASPBAKT100

WW10K H.264 chipset

Multi-channel H.264 HD codec chipset for HD video conferencing & telepresence.

the following cards are installed on the board:

aspen-vin-000 Video output video input module wwaspbavi rev B
aspen-vout-000 Video output module wwaspbavo
aspen-dsp-000 Embedded host module wwaspbata rev A
aspen-FPGA-000-rev decoder module wwaspvafa rev A

Complete WW10K Chipset Development Kit

Aspen is a complete development kit for the WW10K H.264 codec chipsets for HD video conferencing and broadcast camera head-end applications, respectively. Aspen gives developers access to the complete range of functionality of these chipsets. Its fully modular design provides designers with the ability to rapid prototype with different video I/O and host configurations.

Highly Modular Design

Aspen consists of four mezzanine modules and a mainboard. The four mezzamodules consist of:

Video input mezzanine module.

Video output mezzanine module.

Decoder mezzanine module.

Embedded host mezzanine module.

Key Features

WW10K and WW20K H.264 HD codec chipset support
Highly modular design
Video I/O, embedded host and decoder modules
HDMI, DVI, HD-SDI, RGB, component, composite and S-Video I/O options
Multiple video I/O ports
Full-duplex encode and decode
10/100Base-T Ethernet support
PCI add-on card form factor
Stand-alone and PCI add-on card operation modes
Complete set of device drivers and APIs
Linux OS support

The video input module can accept either composite, S-Video, RGB, DVI or HD-SDI inputs, convert these to YUV 4:2:2 format and feed up to four streams simultaneously to the encoder on the mainboard.

The video output module can produce either HDMI, HD-SDI, RGB, composite or S-Video outputs from four YUV 4:2:2 decoded streams coming off the decoder.

The embedded host module conof a TI DM642 DSP processor, which can be used to implement audio codec functions and system host functions such as Ethernet communication and encoder and decoder configuration and control.

For video conferencing and telepresence applications the mainis configured with a WW10000BA encoder, WW100001BA decoder mezzanine module, video input and output mezzanine modules and embedded host mezzanine module. Two Aspen kits can communicate in this configuration in full-duplex encode-decode mode with each other via Ethernet, either in stand-alone or in PCI add-on mode. HD resolution cameras can be connected directly to the HDMI inputs on the mainboard and on the video input mezzanine module. SD resolution cameras can be connected directly to the CVBS, Y/C and component video inputs of the video input mezzanine module. HD monitors can be connected to the HDMI outputs on the video output mezmodule.

For low delay, live video broadcast applications the mainboard is configured with either a WW20000BA encoder with video input mezzanine module, or a WW20001BA decoder with video output mezmodule, in addition to the embedded host mezzanine module. An Aspen kit with WW20000BA encoder configuration and an Aspen kit with WW20001BA decoder configuration can communicate with each other over Ethernet in either stand-alone or PCI add-on configura. An HD camcorder can be interfaced via HD-SDI or HDMI to the video input module or via HDMI to the mainboard with WW20000BA encoder. An HD monitor can be connected to the HDMI outputs of the video output module on a mainboard with WW20001BA decoder.

Flexible Operation Modes

The PCI host function on the embedded host module allows Aspen to be used as a PCI add-on card in a PC, while the LAN function allows it to be used in a stand-alone configuration, running IP and RTP protocol stacks. This provides developers with maximum flexibility. An embedHTTP server on the host module allows convenient, browser-based monitoring, control and configuration of the encoder and decoder.

SDK Support

Aspen comes with a complete set of APIs, device drivers, setup and configuration utilities and sample programs. All software is easily ported between different OS and RTOS platforms. The API provides access not only to video input and output streams, but also to encodand decoder tools, bit rate control, etc. A hardware abstraction layer (HAL) decouples the underlying hardware from applications. A single device driver supports WW10K and WW20K encoders and decoders. Separate device drivers are included for support of Aspen in a PCI add-on card configuration. Utilities and sample programs are available for stand-alone as well as PCI add-on operation modes.

Two-Way Video Communications Solutions

Low Delay Live Broadcast Solutions

Features

Mainboard

WW10000BA or WW20000BA encoder or WW20001BA decoder

2x 64MB DDR2 DRAM

2x HDMI inputs

1x HDMI output (encoder reconstructed video output)

Audio stereo line-in

Audio stereo line-out

Microphone in

Speaker out

10/100Base-T RJ45 jack

32-bit/33MHz PCI interface

DC power jack

PCIX power connector

Full-size PCI add-on card form factor

11.1 x 4.4 (280.9mm x 111.8mm)

Video Input Module

1x DVI input

1x HD-SDI input

1x Analog RGB input

1x Y/C input

4x CVBS inputs

4x 8-bit YUV 4:2:2 mezzanine connector

1x 24-bit RGB output

4.2 x 4.2 (106.7mm x 106.7mm)

Video Output Module

2x HDMI outputs

1x HD-SDI output

1x Analog RGB output

1x Y/C output

2x CVBS outputs

4x 8-bit YUV 4:2:2 mezzanine connector

4.2 x 4.2 (106.7mm x 106.7mm)

Video Decoder Module

WW10001BA decoder

2x 64MB DDR2 DRAM

4.9 x 3.9 (124.5mm x 99.1mm)

Embedded Host Module

TI DM642 DSP processor

32MB SDRAM

Watchdog timer

3.9 x 3.9 (99.1mm x 99.1mm)

SDK CD included!

WW10K and WW20K chipset device drivers

Linux PCI drivers

Browser-based configuration, control and monitoring applications

Sample applications

Documentation

PART NUMBER: WWASPBAKT100
DESCRIPTION: Aspen WW10K codec kit. Includes mainboard with WW10000BA encoder, WW10001BA decoder module, video input and output modules, embedded host module, AC adapter, documentation and software CD.

Don't forget to place your bid.

on this sale you agree to the following terms:

Shipping Terms:

Buyer pays all shipping costs.

Shipments made to California must include 8.00% sales tax unless we are provided with a valid resale certificate.

We reserve the right to ship with Fedex ground, USPS and any other major carrier in the best interests of the buyer and seller.

Payment Terms:

Payment is to be made by PayPal

Payment is to be received within ten days of close of auction.

Should payment not be received within ten days the item will be re-listed and high bidder will forfeit.

International Terms: (These terms only apply to international shipments.)

Buyer is responsible for all brokerage, customs, and or duty charges.

*Not all items are available for international shipment due to import/export regulations. In the event that we are unable to ship to buyers country, buyer will receive a full refund.

Payment must be made in US Dollars.

Money must be drawn against a US bank.

Warranty Terms:

What you see in the picture(s) is what you get nothing more nothing less.

Test results of item(s) in auction are described to the best of our ability in the ad. The results of all tests that are performed are disclosed in the ad.

The maximum liability of BetterwithBusiness(the seller) is the high bid of the auction and original shipping.

Return Terms:

Returns are allowed within 14 days of receipt

If there is a Problem Contact me directly at 619-519-0869 to receive a more immediate response. Opening a case slows the return/refund process.

Bidder should request a RMA number before returning item(s).

Medical Terms:
The following terms apply to any and all medical items or any item offered for sale in any medical category or any item that deems these terms are applicable to:

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you may not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.

The buyer will not hold the seller, or the item's manufacturer responsible for the appropriate or inappropriate use of this device either by the user or a third party. Once purchased, it is the sole responsibility of the purchaser to assume any and all liability from the use of this device.

Please note before bidding that any medical equipment purchased should be completely tested by a qualified biomedical technician prior to being put into service. Mr. Rydell in San Diego, CA, USA Phone: 619-519-0869 Business name: BetterwithBusiness

sale Wizard 2000 - The Complete Auction Management Software Solution