This auction is for a NEW in the BOX ANACONDA 7/8" O.D. BRAIDED BRONZE VIBRATION ELIMINATOR (M/N: 3434 FY) and comes with specs. outlined below ~ please feel free to email your questions or requests for more information.

Vibration absorbers are designed for installation in the suction and discharge lines of air conditioning and refrigeration systems to dampen the transmission of compressor-induced vibration through system piping.

Vibration absorbers function best when installed as close to the compressor as possible, and perpendicular to the major vibration direction. For optimum absorption of vibration, the refrigerant line should be anchored at the absorber end furthest from the vibration source.

• Outside Diameter (In.): 7/8
• Length (In.): 11-1/2
• Maximum Operating Pressure (psi): 500
• Burst Pressure: 2,500
• Flexible tubing: Corrugated red brass for 1/4"–1 5/8"; corrugated type 321 stainless steel for 2 1/8"–4 1/8"
• Wired braid: Bronze for 1/4"–1 5/8"; type 304 stainless steel for 2 1/8"–3 5/8"
• Ferrules: Copper for 1/4"–1 5/8"; type 304 stainless steel for 2 1/8"–3 5/8"
• Tube ends: Copper