QTY. 12, STICK IN THE GROUND, WEAVE POLE PEGS
+ 24 inch WEAVE POLE SPACER for 12 POLES
(SAVE MONEY BY CUTTING YOUR OWN POLES OUT OF 3/4 in PVC PIPE)
Please note that weave poles are a double duty piece of agility Equipment.
Using Weave 2 poles in combination with our Jump Cup Cross Bar Holders &
an Additional length of PVC Pipe Creates an inexpensive, Height Adjustable Agility Jump.
INSTRUCTIONS INCLUDED
6" LONG PEGS,
(Can be cut down if desired for use in extra hard, or rocky terrain)
We use a Long 1 pc. Bolt with an Extra Large Flat Head, to ensure longer life and a stronger Weave Pole Peg.
Some of the cheaper pegs use a piece of Threaded Rod with just a couple of Locking Nuts to hold the Cup together.
The small nut on the Top Side just barely hanging on the the end of the rod, can easily come loose, and get lost.
Simply press the lengths of 3/4 in PVC Pipe that you provide,
(Cut to the lengths you desire),
into the Weave Pole Pegs.
Then, stick in the ground using the weave pole spacer
The Weave Pole Spacer is a very fast and simple way, to evenly space
your weave poles, in a perfectly straight line at the correct distance apart.
Simply place a weave pole in the hole on one end,
Stretch the Spacer Tight, and Place a Pole at the opposite end of the spacer,
so it is Stretched Tight, and in a straight line.
Then just add a pole in each of the middle holes along the strip.
It can't be any faster and easier.
Weather resistant material,
(same material used in dog leashes and tie out leads)