The unit is a single door multifunction standalone access controller, which is an ideal choice for door access for shops, households, commercial and.industrial applications, such as, factories, warehouse, laboratories, banks and prisons

Feature:

  • Waterproof degree: IP68
  • With Anti-theft alarm output for external alarm device
  • With built-in-anti-theft equipment
  • Support enrolling cards continuously
  • Perfect design, with backlight and fashion silver finish
  • Waterproof design for outdoor use
  • Strong standalone function device can be used as WG26 reader alone
  • Capacity: 2000 user's cards, 2000 codes
  • Access ways: Cards, code, card + code
  • Lower power: Static current less than 30mA
  • Support only keypad
  • Users can reset private passwords
  • WG output W26 for card and W34 for codes
  • Use keypad to delete lost cards for safety
  • Short-circuit protect: When relay or alarm output short circuit, it will shut up in 0.1ms
  • Strong Zinc Alloy Electroplated anti-vandal case
  • Full programming from the keypad
  • Backlight keys
  • Adjustable Door Output time, Alarm time, Door Open time
  • Fast operating speed, <20ms with 2000 users
  • Easy to install and program
  • Built in light dependent resistor (LDR) for anti-tamper
  • Red, Yellow and Green LED display the working status

Specification:

Project

Indicators

Power Supply

12VDC + 10%

Unlock relay

12VDC/2A

Electric lock output

Max 3A

Alarm output

Max 20A

Output short-circuit protection time

Max 0.1ms

Effective Cards

2000

Ambient temperature

-45-60 degree centigrade

Relative humidity

10%-90% RH

Password

4 digit PIN code

Built-in proximity card reader identify the frequency

ID type: 125KHz
IC type: 13.56MHz

induction card identifying the type

ID type: EM or compatible
IC type: MF1 or compatible

Card reader from

ID type: 5-15 CM
IC type: 3-5 CM

Electric locking interface

Relay output or input of optional

Open access

1

Doorbell button

1

Door sensor interface

1

Interface to an alarm

1

Add-in Reader Interface

1 WG26 interface

Size

118*56*20mm