The DX Series Pack is a cost-effective solution for a 2 Door Access Control System. You can connect up to 4 Proximity card readers (one on each side of the 2 doors). If you don't have a need to know when someone exits your building you will only need a reader on the entrance side of the door and an exit button on the exiting side. You will also be able to integrate this with an alarm, sirens and/or strobes.
Accessing this 2 door access control panel is super easy. The control panel has an RJ45 port for you to attach an Ethernet Cable such as Cat5E or Cat6. The other end of the cable plugs into your network. Yes, it's that easy. Then, any PC that is on that network can access that control panel using our DX Access Control Software. You can specify and register users, configure access control proximity cards, create times that the door can be accessed and so much more.
As your needs change and you want to add more doors to your access control, we have made it easy for you to do that. With our DX Series of Access Control Boards, you can connect several of the boards to your network and our DX Access Control Software will recognize them all. For example, if you buy this 2 door access control package and need to add a third door, all you need to do is get a 1 door access control board, connect that to the network and you will be able to control all three doors with the same software.
We can send 110v or 220v (please leave us a message if no message is leaved we will send by customer address, for example if is US customer 110v, if EU customer 220v)