Aurora Orionics FW303 Automatic Fiber Optic Fusion Splicer Ametek Instruments fw-303 + manual
working condition,but needs a new LC-R127R2P battery
-
Splice Loss: Average splice loss typically 0.15 dB or less when splicing commercially - available 50 um core, 125 um O.D. graded index fibers.
-
Viewing Optics: Rear projection screen technique, 60X magnification with calibrated 25 um markers and fiber alignment pointers.
-
Arc: High-frequency, alternating current, tungsten electrodes.
-
Arc Controls: Individual thumbwheel settings for time and intensity. Time can be set from 0.1 to 9.9 seconds in 0.1 second increments. Intensity can be set between 00 and 99 (10 to 30 mA).
-
Fiber Alignment: V-groove alignment system with two single-axis positioners.\
-
Power: Powered from the following power sources
Internal DC batteries with integral charger.
Powered from a 100 - 250 VAC, 48 to 440 Hz source, 40 W.
Powered from external 11 to 18 VDC, 3A source.
Weight: Net 26 lbs
Functionality/Degree of Testing: Unit powers on. When the lamp button is pressed a light source behind the splicing area engages. When the arc button is pressed an electric arc turns on.
Don't forget to place your bid.
|