NOW GET FREE SHIPPING WITHIN THE CONTINENTAL USA,
AND DISCOUNTED SHIPPING TO ELSEWHERE IN THE WORLD!
NOW YOU CAN BE PART OF THE HOTTEST TREND IN AMERICA... CUSTOM-COLORED, "CONCRETE" COUNTER TOPS, WALL STONE, AND FLOOR TILE... BUT WITHOUT PAYING THE HIGH RETAIL COST! WHY PAY $8.00-$12.00+ PER SQUARE FOOT AND MORE FOR STONE AND TILE? WE SHOW YOU HOW TO MAKE THIS HAND-CRAFTED FIELDSTONE LIKE THAT PICTURED, WITH OUR FREE INSTRUCTIONS AND MOLDS.
MAKE REAL-LOOKING STONE LIKE THAT PICTURED... FREESTANDING WALLS, PAVERS, OR STONE VENEER WITH THESE MOLDS...
WE TELL YOU HOW!
AND YOU CAN START NEXT WEEK!
The "HOW TO" process is so simple... virtually anyone can do it!
It's like making a cake! But no oven is needed!
HERE'S HOW...
1. Lubricate the molds... a light vegetable oil will do if you don't have mold release.
2. Mix a bag of pre-mix concrete… get a shovel, water, and something to mix it in.
3. Add some concrete color, which is optional… unless you want just plain gray.
4. Pour mix into molds… vibrate a bit to compact concrete and release air bubbles.
5. Let the filled molds sit a day or so, undisturbed… over-night is fine.
6. Carefully flip the molds over the next day… and pop out what you’ve created from the mold!
That is obviously a simplified version of the process, but it is that easy. And FREE instructions and email support are included with each purchase.
We are proud to say that ALL of our products and the raw materials used in them,
are MADE IN THE USA
Our molds are designed and manufactured by us in Florida since 1992!
THE BEAUTIFUL FIREPLACE SHOWN IN OUR PHOTO WAS MADE BY TIM McCLELLAND, ANER JUST LIKE YOU, WITH NO PREVIOUS EXPERIENCE MAKING STONE! HE NOT ONLY BUILT THE FIREPLACE... HE MADE THE STONE USING OUR MOLDS AND INSTRUCTIONS!!!
SAVE BIG $$$$ - MAKE THEM FOR AS LITTLE AS $0.35 A SQUARE FOOT!
We've made two pallets of our "Castle Stone" with three bags of Portland cement, (about $6.50 per bag), that equals just over 112 square feet of lightweight stone. You will get similar results with our "Olde Appalachian Fieldstone" molds.
AND YOU CAN START PRODUCING NEXT WEEK!
WHETHER YOU WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS... OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE... WE ARE THE SOURCE!
YOU ARE PURCHASING FOURTEEN (14) DIFFERENT, "OLDE APPALACHIAN FIELDSTONE" CONCRETE MOLDS (SHEET #OAF-04), (Totals 7 +/- Sq. Ft.).
The fourteen mold sizes are as follows: 3x4, 4x6, 4x7, 5x5, 5x6, 5x7, 5x8, 3 each 6x8, 2 each 6x9, a 7x9, and a 7x10. Molds were measured at their furthest points in both directions. Sizes are approximate and were rounded off to the nearest full inch. The mold sheets are 28"x36" so the individual molds will be cut from the sheet prior to shipping. FREE shipping within the Continental USA only.
YOU CAN MAKE CUSTOM-COLORED, HEAVY, MEDIUM, OR LIGHT-WEIGHT STONE WITH THEM. MAKE THICK STEPPING STONES, WALLS, OR THINNER STONE FOR FLOORING OR VENEER... DEPENDING ON THE THICKNESS YOU POUR THEM. THESE MOLDS ARE BETWEEN 1-1/2" TO 2-1/2" THICK. MOLDS ARE SEPARATED FOR YOU BEFORE SHIPPING.
Complete FREE instructions on how to make the stone are included!
You get fourteen (14) molds that make a natural 7+/- sq. ft. pattern. Add our other OAF Sheets, (available in our Store), to get an even better "mix" of stones for larger areas.
We also make many other sizes of Olde Appalachian Fieldstone molds that are approximately 1-1/2" to 2-1/2" thick, and will blend with these perfectly for walls, walks, etc... The fireplace photo in this listing includes stone made with molds from this and other OAF sets as well.
WANT MORE MOLDS?
BUY ALL FIVE SETS OF OLDE APPALACHIAN FIELDSTONE FOR ONLY $475.00...
YOU SAVE $ ...AND GET FREE SHIPPING!
Interested in starting your own business?
Become an "Olde World Stone & Tile" Producer!
Since 1992, we've trained hundreds of entrepreneurs worldwide in how to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success!
SEE OUR OTHER LISTINGS, OR VISIT OUR STORE, FOR MORE MOLD STYLES AND SIZES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.
For additional product information, tile and stone installation photos, and more... visit our extensive TheMoldStore and Oldeworld websites, or if you have questions, feel free to call or email us.
reTrade
