Joyo JMA-15 Tube Amp

Hign gain tube amplifier head

JOYO Mjolnir High Gain Tube Amplifier is designed especially for metal sounds. It features a straightforward approach with deep low end and searing distortion. This amplifier will give twin coil pickups a thunderous roar and make single coils cut straight through the mix! The JMA-15 is designed with a classical high gain circuit and two channels: Channel 1 is CLEAN, PUSH is used for boosting middle frequency and gain. Channel 2 is distortion and  includes NORMAL and MID CUT  controls. When in NORMAL mode you can obtain fierce modern distortion. Engaging the MID CUT will give you a solid and heavy low frequency. BOOST can be used on both channels. The JMA-15 has 4-8-and16? impedance speaker outputs, which can power any mainstream cabinet. An effects LOOP is included, but can be BYPASSED when a pure tube tone is desired. Channel switching is easily accessed during performance via the included FOOT SWITCH.The JMA-15 is housed in an all-metal case, and is powered by three ECC83, one ECC82, two EL84. 15W output, can be used for practicing, rehearsal and performance.
 
Feature:
Dual Channel(Clean/Distortion) switchable
tube: ECC83*3?ECC82*1,EL84*2
independent 3 band EQ for each channel
independent Volume control for each channel
Boost funtion
Vintage/MOD distortion mode switchable
send and return effect loop with loop bypass funtion
speaker output: 4/8/16? switchable
rated power: 15W(RMS)

accessory: footswitch pedal(attached to the amp)

Specification:
1):Hign gain tube amplifier head
2):deep low frequency,straight forward sound,wild distortion.
3)classical high gain circuit                                                      

4)two main channel:clean and distortion                        

5)4-8-16ohm three impedence outputs,all-metal case,four ECC83,two EL84,15W output                             

6)Boost and Loop , foot switch