Youxmoto 700294 HVAC Blower Motor Assembly with Fan Cage fit for BMW 520i 528i 535i 550i 640i 650i 740i 740Li 750Li Replaces 64119242607
Item Description

About this item

  • Fitment Vehicles: The heater blower motor fit for BMW 528i 2011-2016,fit for BMW 528i xDrive 2012-2016 ,fit for BMW 535d 2014-2016,fit for BMW 535i 2011-2016, See below for full vehicle list. Compatible Part Numbers: 64119242607, 75027
  • Function of Blower Motor: The HVAC blower motor is controlled by the knobs or buttons on the climate control unit. When your heat or A/C is turned on, it is what forces the cold or warm air from your vehicle's A/C or heating system through the interior vents, circulating it throughout the cabin.
  • FFeature of Blower Motor: In the production of blowers, the dimensions are strictly in accordance with the standards. The components used are designed for plug-in type and the plug-in type is easy to install. Motor testing without excessive noise.
  • Comprehensive Testing: Outstanding materials and sub-components provide maximum strength and durability. The motor has Strict inspection before delivery, including noise, vibration, current, speed, low voltage start and so on.
  • Every Blower Motor must take inspected and tested multiple times before the shipment.
*The AC Blower Motor is responsible for producing air that goes through the vents of your vehicle's AC and heating system.
*If your AC or Heater does not produce or circulate any heated or cooled air then you may have a problem with your blower motor.
*Step up from the ordinary, It is time to replace the blower motor that has stopped running.
*When you replace the blower motor, it is recommended to replace the new blower motor resistor.
*Please use the year/make/model drop down bar confirm the compatibility before purchasing.

Weak airflow for both the heating and cooled air coming out of the vent
No air pushing through the vents (motor broken down or bad control module)
Unusual blower noise such as a rattle or squeak (worn motor or bad bearings)
If you have an overheating blower motor, would be a burning smell coming from your air vents
Material of rotor punching plate is silicon steel sheet,avoid burning of motor
1.Remove the screws under the passenger side dashboard of the vehicle.
3.Disconnect the blower motor electrical connector.
5.Compare the new blower motor to the old one to verify that you have the correct part.
6.Install the new blower motor into the box and tighten the screws.
8.After the installation is complete, turn on the air conditioner and check if it is running normally.

Payment
We accept payment only through PAYPAL

Shipping
We ship products worldwide through standard express courier service, it will reach within 7 to 10 days to abroad buyers, we ship the product after recieved clear payment and give full information about shipment to the buyer
Return
We accept product return 25 days from delivery date but product should be in original condition.