Item description for Sega Genesis 2 Triple Bypass 3BP v2 w/ Composite Restore + Recap + Green LED

Triple Bypass 3BP v2 Sega Genesis 2 NTSC US - Console Only

All capacitors replaced with long lasting polymer capacitors that will not leak made by KEMET. (https://forums.nesdev.org/viewtopic.php?f=12&t=2023)
Triple Bypass v2 for Excellent RGB Signal and Crystal Clear Stereo Audio (https://consolemods.org/wiki/Genesis:Triple_Bypass_Mod)
Composite video restored with cleaner RGB signals from triple bypass board. Looks great on a CRT!
New Cart Connector installed, games load easily!
Reset switch replaced with a clicky switch that will greatly outlast the original switch.
Green Power LED.
Case and internals cleaned

You can either use the RGB output or the Composite output of this console, both look great and are running through the Triple Bypass for excellent video quality.

The console has been tested and verified working and ready for gaming. See photos for details and proof of work.

This does not come with cables and converters for getting RGB output, you will need to get those separately. I recommend one of the following setups (from easiest to most complex):

Rad2x Cable for your system (gives you HDMI output in a single cable). (https://www.retrogamingcables.co.uk/RAD2X-CABLES)
Component Cable for your system (https://www.hdretrovision.com/) + Upscaler (https://www.retrorgb.com/upscalers.html). (lets you use the upscaler for multiple systems and has more options)
RGB SCART cable (https://stoneagegamer.com/search-magic.html?query=scart+cable) + RGB SCART to Component Converter (https://www.retrorgb.com/converters.html) + Upscaler (https://www.retrorgb.com/upscalers.html). (The most versatile option as you can use this setup with any system and a SCART cable)

Here are the upscalers I recommend (if you're not going to use a Rad2x cable and need an upscaler):

RetroTinx 2x/2x-Pro/5x/4k (https://www.retrotink.com/shop)
Open Source Scan Converter (OSSC) (https://stoneagegamer.com/ossc-pro-open-source-scan-converter.html)
RetroScaler2x (https://www.ebay.com/sch/i.html?_nkw=retroscaler+2x) (I don't really recommend this unless the others are unavailable or you are on a tight budget because it is a bit janky and is of questionable origin)

And the RGB to Component converters (if you're going to use SCART instead of a component cable for your system):

RetroTink RGB2COMP (https://www.retrotink.com/product-page/rgb2comp)
Shinybow SB-2840 SCART-RGB to Component (https://www.ani-av.com/shop/product_info.php?products_id=220)
Bitfunx RGBS/VGA to YPBPR (https://www.ebay.com/itm/326265271747)