Visit and request live test run video and test report, Industrial Sol Pte Ltd Singapore, Jurong East - isolonline
OSG928
DNH


Clipsal 


C-Bus2 



Cat: E5100TAU-315 82039 28103




C-Bus Telephone Interface 


5100T Series




Clipsal Integrated Systems Pty Ltd
Schneider Electric





Included Cables







Supply Voltage: 12 VDC
Supply Current: 300 - 500mA
C-Bus Voltage: 15-36 VDC
C-Bus Current: 18mA (Nom)






Included 4 - Cables




The Telephone Interface is suitable for connection to the telephone network using a Mode 3 connection, in parallel, or by insertion into a local circuit. It can be installed as a stand-alone item with connection to C-Bus, or into a Clipsal StarServe cabinet. 


The Telephone Interface unit is packed with the following: 


1 x 12 V DC plug pack 


1 x RS-232 cable (DB9F to DB9M), 2 metres 


1 x RJ45 patch lead, 300 mm 


2 x RJ12 patch leads. 1 metre





C-Bus Telephone Interface 5100T Series 


    

  • Offers a dial-in and dial-out facility to control and monitor a Clipsal C-Bus system.

    • 

  • Includes an audio output, so C-Bus events can be audibly announced.

    • 

  • Data connection mode allows existing C-Bus installation software to be used for remote changes to a C-Bus installation. 

    • 

  • Programmed via a PC running the C-Bus Telephone Interface configuration software. 

    • 

  • Issue voice prompts, report C-Bus status, and allows and operator to send commands and set options using standard telephone DTMF tones. 
    • 

  • Power from a 12Vdc (polarity independent) or 12Vac (50 or 60 Hz) plug pack. 
    • 

  • Connects to either The Public Switched Telephone Network (PSTN) or A Private Automatic Branch Exchange (PABX).
    • 

  • Includes three RJ12 sockets for telephone connections, designated "Phone In", "Primary Phone Out" and "Secondary Phone Out". 
    • 

  • Connects to a PC via an RS-232 link, using a DB9 connector located on the front face of the unit. 
    • 

  • Includes a software selectable C-Bus network burden and clock.
    • 

  • Supports communication over multiple networks through C-Bus network bridges. 
    • 

  • Operates in "Home" or "Away" modes, and determines operation in these modes in response to a C-Bus message. 
    • 

  • Permits dial-in or local telephone control of any pre-programmed C-Bus Application and Group Address (on, off or ramp to level). 
    • 

  • The number of rings before line pick up is programmable, separately, for "Home" and "Away" modes.
    • 

  • Includes a user profile number and password to access the voice prompt menus.
    • 

  • Able to dial-out or announce in response to a programmed set of C-Bus messages.
    • 

  • Incorporates LED indicators for C-Bus network status, internal communication, RS-232 communications and telephone "Line Grab". 
    • 

  • Incorporates a history log, which records details of incoming and outgoing calls. 
    • 

  • Pre-loaded with a standard library of words and phrases. 
    • 

  • Supports multiple languages. 
    • 

  • Dimensions: H=146.5mm, W=145mm, D=30mm. 
    • 

  • Optional mounting bracket allows unit to be mounted directly into Clipsal Star Serve Home Networking Unit.
    • 






The C-Bus Telephone Interface Unit allows control and monitoring for a Clipsal C-Bus system via a telephone dial-in and dial-out facility. An audio output is also included, allowing C-Bus events to be audibly announced via any standard Audio Amplifier. The C-Bus Telephone Interface connects to either The Public Switched Telephone Network or to a local PABX. 









New with box.






Power on and tested item testing picture are attached.








May have some marks and scratches due to old stock. 









© All the pictures are Organic and this part is physically in our stock.











Condition and Details:




This is a new item in good condition.


With box.


No Accessories / Cable or probe (only what showing into actually given pictures and in description).










Old Stock.
(A new, unused item with minor signs of wear. The item may be missing its original packaging, or the original packaging has been opened or is no longer sealed. The item may be a factory second, or a new and unused item with minor cosmetic issues or sign of use due to conduct a test before offering for sale). Furthermore, any noticeable issue will describe with the item specification above before this portion.







Shipping:


Usually, we ship same business day, subject to clear funds into our account 


Standard order processing time is 2 to 3 business days 


Item will be packed as per International Standard, 


International Orders: DHL / SingPost / EMS 
 


* International buyers pay all custom, duties, taxes & brokerage fees at their end


 




Warranty and Returns:




Warranty: 


30 DAYS Money Back or Replacement Return Accepted.








Product Returns:




Returns:


Return 
to Base Warranty, Any type of power failure/burn / physical damage / tempered seal will void the warranty.
 













Payment:


Payment Methods:




PayPal


Credit Cards  


Wire-transfer: Kindly contact us for payment instructions




International buyers without PayPal: Kindly contact us before bidding
                          
About Us:


We deal in Semiconductor & Wafer Handling Parts/Components/machinery and types of equipment. A Verity of Industrial Automation Equipment and Parts.




Industrial PCs, PLCs, HMI, Controllers and Sensors.


Industrial robotics, Data Acquisition and Test & Measurement.  


Industrial Single Board Computers.


Marine Parts / Equipment's.


Oil & Gas and offshore station.


Lab and Research Equipments.




We Source, We refurbish, We Service and We also Repair …please contact for any further detailed inquiries.