Spyder Tarantula 1" Hole Saw HEX 10 Tungsten Carbide-Tipped 600896CF with Free Shipping


Spyder’s carbide-tipped Tarantula™ hole saws, 1", cut the toughest materials

 including steel, stainless steel, nail-embedded wood, fiber cement board, plastics, and 

more. Durable tungsten carbide cutting teeth make up to 50x more cuts than 

conventional bi-metal hole saws, and they are up to 10x faster — cutting through the 

toughest materials and extending bit life. Use with Spyder’s Rapid Core Eject™ arbor 

system to remove cores without prying (drill hole, press button, pull back the hole saw, 

and eject the core), cut at an angle, and enlarge existing holes using two adapters on 

one pilot bit (adapters and pilot bit sold separately). Spyder TCT, Bi-Metal, and 

Tarantula™ hole saws fit on Spyder’s Rapid Core Eject™ arbor and pilot bits and on 

universal hole saw arbors. Using a drill motor with a support handle is recommended. 

Not for use in hammer mode or on harder, more abrasive materials.


Technical Details:

- External diameter: 1"

- Up to 50X more cuts than bi-metal hole saws
 
- Up to 10x faster than standard hole saws
 
- Tungsten Carbide Tipped for extended life and clean cuts
 
- Cuts wood, concrete block, brick, fiber cement board, ceramic wall tile, PVC and more (with a Mohs hardness of less than 6)
 
- Up to 2-3/8″ depth of cut
 
- Utilizes Rapid Core Eject™ Arbor System (arbor and pilot bit not included) – rapidly eject the core, quickly change diameter, cut at an angle and enlarge existing holes
 
- Always use a drill motor with a support handle in standard rotary drilling mode only
 
- Not for use in hammer mode
 
NOTE: Arbor and pilot bit not included. Only the hole saw.