Used to counter-hold the crankshaft pulley to release and tighten center bolt
Compare to Volvo Factory Tool: #999 5433
Basic Instructions:
Removal:
Remove the engine drive belt.
Use the Crankshaft Pulley Holder, to prevent the crankshaft from rotating while loosening the crankshaft balancer bolt.
Remove the crankshaft balancer bolt. Discard the bolt.
Remove the crankshaft balancer.
Install:
Install the crankshaft balancer.
Install a NEW crankshaft balancer bolt.
Use the Crankshaft Pulley Holder to prevent the crankshaft from rotating while tightening the crankshaft balancer bolt. Tighten the bolt to Manufacturer recommended ft. lbs.