Carburetor For Ford F100 F150 4.9L 300 Cu 1-barrel Carburetor Carby

Fitment:
for Ford Engines:
4.9 L 300 cu
4.1 L 250 cu
3.3 L 200 cu
for Ford F100 F150 F250 F350 1965-1985
for Ford F300 4.9L CA-7051 CA-1270
for Ford Broncos, for Fairmont, for Granada,
for Econoline E Series E-100,E-150,E-250, E-350 1965-1985
Note: Replace for Carters type YFA Carb, 1-Barrel, Electric choke

OE/OEM Part Number :
CA-7051, CA-1270, 16010-FD300, 16010FD300

Specifications:

- Placement on Vehicle: Front     
- Input Voltage: DC 12V
- Material: Zinc Alloy
- Choke Type : Automatic Electric Choke
- Carters Type: YFA 1barrel
- Drive Type: Electric
- Part Type: Fuel System
- Color: Chrome  

Size:

Air Inlet Bore Size: 43mm

Choke Air Horn Inner Diameter: 48mm

Choke Air Horn Outer Diameter: 66mm

Mounting Stud Measure: 75mm(Center To Center)

Feature:

- Carters type YFA 1-barrel, automatic choke, auto & manual transmissions. Add 5~10% horsepower and maintain near stock fuel mileage, improve throttle response for better engine performance.
- 100% tested For reliability and performance,easy to install and and long life as a guarantee
-  Brand New Manufactured with New Premium Quality Components.
- 1 Year warranty, Fit and Quality Guaranteed, Backed by satisfying after-sales service.
- 5 Common Symptoms of a Bad or Failing Carburetor: （1) Reduced engine performance; （2) Black smoke from exha-ust; （3) Backfiring or overheating; （4) Hard starting; Since it is the component directly responsible for providing the fuel and air needed for the engine to run, the carburetor is one of the most important components on any vehicle equipped with one, and any problems with it can greatly affect the drivability and performance of the vehicle; it is necessary to replace failed Carburetor in time

Description:

1. Carburetor structure: Components of Carburetor usually include a storage chamber for liquid fuel, a choke, an idling (or slow-running) spout, a main spout, a venturi-shaped air-flow restriction, and an accelerator pump. The quantity of fuel in the storage chamber is controlled by a valve actuated by a float.
2. Carburetor is a kind of oil supply device in the engine of automobile, The goal of a carburetor is to mix just the right amount of gasoline with air so that the engine runs properly.
In the middle of the air intake channel of carburetor is a narrow throat.
The air absorbed by acceleration engine will produce venturi effect to suck out, atomize and mix the fuel in the thin pipe.
3. Main Function: The goal of a carburetor is to mix just the right amount of gasoline with air so that the engine runs properly. If there is not enough fuel mixed with the air, the engine "runs lean" and either will not run or potentially damages the engine.
4. How to clean the carburetor:
（1) Close the fuel valve, remove the hose, loosen the screw, and remove the carburetor;
（2) Unscrew the screw at the bottom of the carburetor, remove the float bowl, and then use a tool to pull out the float pin to remove it
（3) Unload the spout
（4) Unscrew the air screw and idler screw on the side, and remove the external parts
（5) Clean the parts with detergent
（6) After cleaning, install the float needle and fuel splash plate first, and then install the nozzle and splash plate.
（7) Install external parts and floats
（8) Install the carburetor

Package Included:

1x Car Carburetor for Ford

Mounting gasket & seal included

★ 30-day Money Back & 2-Year Replacement Guarantee. Please feel free to contact us if there is any question.