SAFETY:
NEMA 4X compliance for the controller as a standard feature
Compact size reduces potential for lifting injuries during installation
Universal torsion shaft mounting system reduces the potential for unsafe work practices during installation.
Fully adjustable automatic obstruction sensing system detects obstructions on any part of the door in the open or close direction while monitoring the entire door movement for unsafe operation or service conditions.
Inherent soft start-soft stop, safety stop-reverse eliminates the mechanical stress damage to the door when the door reverses
Self determining limit system prevents thrown cables from debris, ice, and snow left in the door opening
VALUE:
Continuous duty rated low voltage motor
Ultra-Quiet DC Motor, will not thermally overload.
No extra costs to have controller achieve NEMA 4/IP 66 rating.
Built in Service Due reminder may be activated to ensure regular maintenance based on cycles of usage
Fully programmable Timer-to-close
Built in interlock terminals to prevent door operation
Programmable mid-stop.
SIMPLICITY:
Simple one person installation that eliminate steel build ups, back hangs, welding, and specialty anchors.
Simplistic maintenance design concept.
PCB based system controller eliminates the cost of servicing electrical contactors, limit systems, and countless other parts.
When the operator emergency release lever is disengaged the door easily operates by hand.
Operates all lifts of sectional doors with counter-weights or torsion springs, including rear mount torsion.
Versatile sectional door application mounting. May be mounted vertically, horizon tally, upside down, inside the cable drum, remount torsion, all without requiring wall or ceiling mount.
Simple wiring configurations and accessory modules that eliminate external limit relays to achieve various interlock configurations.
STANDARD FEATURES:
Motor and controller Continuous duty rated DC Motor with controller, producing a powerful soft start/soft stop output of 1300 Newtons of farce to drive commercial rolling sheet doors while reducing mechanical impacts that cause premature wear of door components.
NEMA 4X rated controller case ZAP Controllers and push buttons are NEMA 4X compliant as a standard.
Drive reduction Worm drive gearbox & V-belt reduction drive with fioor level. adjustable belt tensioning /emergency release lever.
Wiring type C2 (factory default), B2 failsafe is standard with the addition of approved photo eye.
Terminal strip provided inside the controller to provide quick, convenient connections for adding external radio control receivers from any desired manufacturer.
Bearings and belts Drive systems use industrial grade bearings and automotive grade long Iife v-belts. Our simplistic service design concept allows simple service of components in a matter of moments.
Construction Heavy-duty 8-gauge electro-plate finish steel frame, industrial bearings, phosphor bronze worm drive gears, aluminum drive pulley, secured with key stock and set screw for simple servicing.
CONSTRUCTION: Heavy-duty 8-gauge electro-plate finish steel frame, industrial bearings, phoshor bronze worm drive gears, aluminum drive pulley, secured with key stock and set ,crew for simple servicing.
PUSH BUTTON STATION: Control unit acts as the standard 3-button station for open/close/stop functions. Controller may be mounted remotely up to 24 feet away from the operator, provided it is to be wired with other external control devices that are designed to function as the primary door controls. Power supply is wired directly to the controller not the motor. low voltage motor cable is supplied for easy wiring of the motor.
Lift |
Low Headroom |
Standard |
High Lift to 54" |
High Lift Above 54" |
Vertical Lift |
|---|---|---|---|---|---|
Door Size W X H |
|||||
8'-14'W X 8'6"-14"H |
8825-3-B |
8825-3-B |
8825-3-C |
8825-3-D |
8825-3-D |
14'-20'W X 8'6"-12'H |
8825-3-B |
8825-3-B |
8825-3-C |
8825-3-D |
8825-3-D |
20'-24'W X 8'6"-10'H |
8825-3-B |
8825-3-B |
8825-3-C |
8825-3-D |
8825-3-D |
Sectional Doors Only |
|||||
SPECIFICATIONS:
CONTROLLER CASE/PUSH BUTTON – NEMA 4X/IP66
CONTROLLER DIMENSIONS – 8.7" H X 10.6" W X 4.5" D
SINGLE PHASE VOLTAGE – 115V US, 208-230V US, 230V EU
AMP DRAW – 3.2A
POWER RATING – 1300 Newtons equivalent to 1 HP
CONTROL CIRCUIT VOLTAGE – 6VDC
LIMITS DETERMINATION – Physical/Self Calibrating
DUTY CYCLE RATING – Continuous
OPERATING TEMP RANGE – -22 deg F to 212 deg F
OVERLOAD PROTECTION – Inherent motor current sensing
LUBRICATION – Permanent
TORQUE INFORMATION – 225Lbs/102kg: Max Torque 90Nm
TORSION SHAFT TYPE REQUIRED – Solid w/ keywy or hollow tube
TORSION SHAFT LENGTH REQUIRED – 4.5" beyond out edge of track
FITS TORSION SHAFTS DIAMETER – 1"
SIDE CLEARANCE REQUIRED – 4.25" for motor only
REPLACEMENT RED MOTOR P/N –
REPLACEMENT BELT SIZE –
8825-B – AX25.5
8825-C – AX27