This is a PETG mount for the Caddx Vista / Runcam Link and a 30mm fan. It serves to prevent overheating in installations with limited venting or when sitting still for awhile while being easy to move from vehicle to vehicle.

Colors: White (default if no color specified), gray and black (infused with carbon fiber)

We can also supply flexible TPU versions upon request (available colors: red, orange and black)

Electronics installation instructions:

The electronics can also be added to all three cases by sliding the camera through the rear of the case first and screwing it down, then slide the air unit without the antenna in, but don't lock it in yet with the four 2mm bottom screws. Position the air unit in the case so that you can mount the antenna to the air unit through the cooling fan hole, then lock the air unit in with the four 2mm bottom screws that line up with the holes in the air unit. Finally, install the cooling fan with the four 3mm screws.

Pictures are for illustration purposes only - colors may vary. The air unit, fan, cables and screws are not included.

Designed by slowjoe170 and licensed under https://creativecommons.org/licenses/by-sa/3.0/

SKU: T6283978