GT3037 GT3076 GT30 500HP Billet Turbo Turbocharger for all 4/ 6 cyl 2.5L-3.0L



 


  

 

 

  

 

 

  

 

 

  

 

 

 

 
Application
 

Perfect for all 4/ 6 cyl 2.5L-3.0L engines

Turbine&Compressor Size

Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange
Exhaust Outlet Flange: 4-Bolt Flange
Turbine Trim: 74.2
Turbine Inducer Diameter:  64.8mm
Turbine Exducer Diameter: 55.8mm
Turbine A/R: 0.82
Compressor Trim: 48.1
Compressor Inducer Diameter: 52.7mm
Compressor Exducer Diameter: 76mm
Compressor A/R: 0.6

Oil Inlet: M12*1.25 & 2*M8*1.25
Oil Outlet: 2*M8*1.25
Water: M18*1.5

Package included
 
  • 1x Turbocharger
  • 1x Flange gasket
  • 2x Oil/Water port gaskets
  • 1x Oil restrictor
  • 1x Bolt
  • 1x Manual
  • 1x Brochure
  • 1x Sticker
  • You will get exactly as shown in the picture above
Notice

* Replace, repair or reconnect air cleaner element per manufacturer's manual to avoid compressor wheel damage.
* Make sure the oil drain line is lower than the turbo itself.
* Gasoline car must install a water cooling device to avoid overheating.
* Ensure exhaust outlet are well sealed by welding
* The degree of modification of the universal turbo depends on your individual vehicle.Professional installation is highly recommended.
* This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order.
* Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated (e.g. insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc.)!

 

Specification


Wastegate w/o Wastegate
Thrust Bearing 270 Degrees
Cooling Type Water + Oil
Bearing Type Journal Bearing
Package Size 30 x 28 x 24cm
Package Weight 8750g
  

  

  

  

 

 

 

 

 

 

 

 

Bearing Type
Dual Ceramic Ball Bearing Floating Bearing Floating Bearing Floating Bearing Floating Bearing Floating Bearing
Compressor Wheel
Billet Wheel Billet Wheel Billet Wheel Billet Wheel Billet Wheel Billet Wheel
Turbine Housing Temperature Resistance
1020℃ 850℃ 850℃ 850℃ 850℃ 850℃
Turbine Wheel Temperature Resistance
1000℃ 1000℃ 1000℃ 1000℃ 1000℃ 1000℃
Exhaust Inlet/Outlet Flange
V-Band T3 / 4-Bolt T4 / V-Band T25 / 5-Bolt T3 / 5-Bolt T3 / V-Band
Engine
2.5-3.0L 2.5L-6.0L 4.0L-6.0L 1.5L-2.0L 1.5L-2.5L 1.5L-2.5L
Horse Power
500 600 600+ 350 400+ 420
Turbine / Compressor A/R
0.82 / 0.63 0.63 / 0.7 1.05 / 0.66 0.64 / 0.60 0.63 / 0.5 0.63 / 0.5
Turbine / Compressor Trim
80.7 / 52.8
(description exceeds maximum possible length)