Jet Letterpress Series Photopolymer

LTP-152-SB

Base Material: Steel Back

Gauge: 0.060" / 1.52 mm

Size: 16.5" x 23.4" / 420 x 594 mm

10 sheets @ $40.00 each = $400.00 per case

Features:

• Press ready in 30 minutes
• Reduced Dot Gain
• Wide Photographic Latitude
• Deep Reverses
• Superior Ink Transfer
• Exceptional Image Resolution: 175 LPI @ 1-95%
• High Quality Image = Cleaner & Brighter Print Results
• Standard Non-Matte Finish

Platemaking Information:

Jet Letterpress Series can be processed in any standard orbital, or in-line water wash sheet photopolymer system.

Review the Technical Data Sheet appropriate for your application.

It is strongly recommended for use with 350 nm UVA exposure lamps. Exposure times vary by plate type, gauge & application.

Jet LTP Series Photopolymer are recommended to washout in room temperature tap water (pH=7) 20 - 25° C /68 - 77° F.

Dry plates utilizing a convection style dryer at 60 - 70° C / 140 - 158° F. Dry plates utilizing a convection style dryer for 10 -20 mins.

Note: Processing times may vary depending on the equipment type, image source and plate thickness.

To obtain a detailed copy of the processing instructions appropriate for your application, please contact a Jet USA Technical Representative.

Resolution:

• Image Halftones: 3-95% @ 150 lines/in.
• Isolated Dots: 200 µm
• Fine Line: 40

Applications:

• Flatbed Letterpress
• Rotary Letterpress
• Tag & Label
• Folding Cartons
• Paper Cups and Plates

Shipping Policy: All items will ship within 2 business day after receipt of funds. Jet USA may substitute delivery via parcel carrier to LTL carriers without notice to assure the product reaches the buyer via the safest means possible. This can be typical with multi-case or multi-product orders.

Product Disclaimer: The information contained is considered accurate. However, no warranty is expressed or implied. Manufacturers will only warranty the replacement of actual product. It is the responsibility of the user to test all products for acceptable results prior to actual production. Product satisfaction must be determined within the first sheet of photopolymer or 5 linear feet of first box for film or adhesive. Contact us via the contact information from your invoice for an RMA number prior to returning.

Warranty Disclaimer: The materials and products on this sale site are provided ?as is" and without warranties of any kind, whether express or implied. To the fullest extent permissible pursuant to applicable law, Jet USA disclaims all warranties, express or implied, including, but not limited to, implied warranties of merchant ability and fitness for a particular purpose and non-infringement. Jet USA does not represent or warrant that the functions contained in the site will be uninterrupted or error-free, that the defects will be corrected, or that this site or the server that makes the site available are free of viruses or other harmful components. Jet USA does not make any warranties or representations regarding the use of the materials in this sale site in terms of their correctness, accuracy, adequacy, usefulness, timeliness, reliability or otherwise. Some states do not permit limitations or exclusions on warranties, so the above limitations may not apply to you.

Limitation of Liability: Jet USA shall not be liable for any special or consequential damages that result from the use of, or the inability to use, the materials on this site or the performance of the products, even if Jet USA has been advised of the possibility of such damages. Applicable law may not allow the limitation of exclusion of liability or incidental or consequential damages, so the above limitation or exclusion may not apply to you.