Fast Shipping
On All Items

30 Days Money
Guarantee

Customer Support
Excellent Service

100% Satisfaction
Satisfaction Guaranteed

3-In-1 Welding Machine IGBT Inverter Portable Welder Equipment with Welding Helmet, Welding Gloves & 2Lb Welding Wire, WLD-1601

3-In-1 Welding Machine IGBT Inverter Portable Welder Equipment with Welding Helmet, Welding Gloves & 2Lb Welding Wire, WLD-1601

Specification

Item Weight 21 pounds
Item model number WLD-1601
Product Dimensions 13.6 x 6.6 x 11.15 inches
Country of Origin China
Manufacturer Agilworx


6.6 inches x 13.6 inches x 11.15 inches. Weight: 21.0 lb
 

Item Description

     

  • 【Powerful 3-In-1 Welder】Composed with Flux MIG (FCAW), Lift TIG (GTAW) and Stick/MMA (SMAW), our powerful 3-in-1 welding machine meets your requirement for different welding situations like home DIY, outdoor maintenance and repairs, etc. (NOTE: the lift tig torch is not included)
  • 【Synergic Control】Equipped with precise data, this flux core welder will automatically match the most suitable voltage, current and wire feeding speed based on your sheet thickness, which is quite friendly for both professional welding worker and beginner.
  • 【Safe & Intelligent】Features overheat and overload protection, our MIG welder will automatically shut off while overheated, and the built-in fan will consistently cool down your welder for 1-2 mins after shutdown. Additionally, the intelligent IGBT technology helps the welder reduce energy loss and works more efficiently.
  • 【Set Includes】To spend you less money and bring you more convenience, our 3-in-1 welder set includes a solar powered auto darkening welding helmet (viewing size: 3.66"x1.69"), a pair of 932°F/500℃ heat resistant leather welding gloves and a roll of E71T-GS .030" flux core welding wire with 2-pound spool.

Product Description

Solar Powered Auto Darkening Welding Helmet

Adopted the TRUE COLOR design, this solar powered auto darkening welding helmet (VIEWING SIZE: 3.66"x1.69") can reduce the lime green tint and protect your eyes from injury while welding, and you can freely adjust the SHADE, SENSITIVITY and DELAY CONTROL according to different kinds of welding modes. In addition, a replaceable lithium BATTERY is included, and equipped with solar panel technology to allow for charging while welding.

Helmet Installation Guide

The installation of this adjustable headband requires for only several minutes, please install based on the following steps (and you can also learn from the video):

1. Insert the PLASTIC SCREW (Part 17) through the hole of HEADBAND (Part 9) and put the ANGLE SET NUT (Part 16) on it (Note: the raised edge should be backward);

2. Put the ANGLE SET PLATE 2 (Part 15) on the ANGLE SET NUT (Note: the raised part should be upward);

3. Put the ANGLE SET PLATE 1 (Part 14) on the ANGLE SET PLATE 2 (Note: the plate 1 can be adjusted);

4. Attach the HEADBAND (Part 9) to the HELMET SHELL (Part 8) and notice the square part should be stuck in the slot;

5. Put the CHECK NUT (Part 13) on and tighten the PLASTIC NUT (Part 12) (Notice not to tighten too tightly)

MIG

  • Install the MIG control switch into sockets.
  • Connect MIG gun cable to (-) terminal of welder and work clamp to (+) terminal.
  • Do not over-tighten.
  • Set the work indicator to MIG mode and select the corresponding wire size.

TIG

  • TIG torch is connected to the negative (-) terminal of the welding machine. (TIG Torch and TIG Torch Adapter are not included in package.)
  • The work clamp is connected to the positive terminal (+).
  • Finally, the gas hose is connected to the gas regulator on the gas cylinder to be used.
  • This is usually used for welding materials such as steel and stainless steel.
  • Set the work indicator to TIG mode.

MMA

DC (+) Welding connection:

  • Connect the electrode cable to the (+) terminal.
  • Do not overtighten the keyway by turning it clockwise.
  • Connect work clamp to the (-) terminal.
  • Plug in connector with key cable.
  • Set the work indicator to MMA mode.

For DC (-) welding, switch the connections above so that the electrode cable is connected to (-) and the work clamp is connected to (+).

Note: Both wiring methods can be used.

 

 

 

 

 

    Return Policy 

• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.

      Feedback

• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.