This is a portable program transfer device that transfers CNC machine programs from a standard USB flash drive (USB pen, pen drive, memory stick?) to or from CNC control through the RS232 communication port, also called Drip feed DNC or Up-Loading & Down-Loading. File name extension supports: *.?NC, *.TXT,*.NC, *touch
Replace the PC running DNC software
NOTE: This is the base device, there is no internal memory and you can only use the program copied from a USB stick
If you need a device with 4GB of internal memory, you can choose DNC TITAN from our store (https://www.ebay.com/str/dnccnc)
function
transfer the program to the memory of the CNC machine
transmit DNC drip program (works in TAPE mode)
receive program or PC / PARAMETER from CNC machine
has RS232 DP9 communication port and
parallel port (FANUC 50 pin)SPECIAL FUNCTION: Fanuc 6M CNC machine drop power program via 50-pin parallel port. in TAPE (DNC) mode
There are 4 magnets mounted on the back of the device that make it easy to insert DNC on CNC machines
USB 2.0 reads, SD card CARDS of all brands and various capacities.
Reading is file names up to 255 characters long
Automatic return to first file after full transmission
Jump Xon
Select the files you want to transfer to a list displayed on the LCD screen
Set the function and parameters with the button, displayed directly on the LCD
Speed baudrate up to 115200bps (1200,2400,4800, 9600, 19200,38400,57600,115200). Change the data transfer rate for parallel ports.