Portable Magnetic Drill 1150W
energized, the electromagnet of the magnetic drill base generates a magnetic field that can firmly adhere to the surface of the
workpiece, achieving drilling or threading of steel plates.
Suitable for steel structures, shipbuilding, equipment manufacturing, equipment installation, bridge engineering, wind power
generation, oil drilling platforms, power construction, railway manufacturing and other fields.
| Voltage | 110V |
| Power Input | 1150W |
| Max.attraction | 11000N |
| Rate frequency | 60Hz |
| No-load speed | 0-880rpm |
| Core drill dia | / |
| Twist drill dia | 13mm |
| Max tapping dia | M8 |
| N/G weight | 23.4lb(10.6kg)/25.4lb（11.5kg) |
| Package Size | 13.9*6.3*13.6in(35*16*34.5cm) |
Two switches, respectively control machine operation and
magnetic base, easy to operate.
Super suction magnetic seat, suction more than
11000N, safe and reliable, side suction can be suction.
Double dovetail guide rail design, high strength wear-
resistant treatment, more durable.
Stepless speed regulation, between 100-670rpm,
arbitrary adjustment.
Rocker type lifting handle, can accurately control the height
of the head lifting.
By observing the level, determine whether the machine
is in a horizontal position.
the surface of magnetic materials such as steel, ensuring that there are no debris on the surface, and check if the magnetic force is normal. The
required thickness of the steel plate should be at least 6 millimeters or more on the flat surface.
2. Place the magnetic drill near the required drilling area, select suitable adsorption materials, and thread one end of the safety belt into the lifting
hole of the rack. Tie the other end to a sturdy support and thread it in with a 100mm outlet. Then tighten the bolts of the fasteners and try to pull
them with force without loosening or shifting.
3.Open the drill switch, check whether the drill is beating, the sound is smooth, if everything is normal, you can turn the handle to feed.
4. The beginning of the feed should be slow, not hard, the feed amount is generally about 0.05mm, do not exert too much force to prevent
overload.
5. If the drill suddenly stops for some reason, the power switch must be turned off immediately (please turn off the magnetic base control switch).
6. Continuous use of 2-3 hours after the need to rest for a period of time to prevent the magnetic seat due to overheating and burn out.
You can make order with no worry.
Any concern just feel free to let us know, we'll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the
weekends & public holidays.
Warranty: 6 months' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us
with low cost.