EASY TO USE CAR TIMER SWITCH RELAY 1- 480 SEC Delay OFF 12V 20A DIRECT 12V OUT
Timer with adjustable delay time from 2 to 480 sec.
Dimensions:
- length - 38 mm
- width 24 mm
- height 19 mm
Power supply - 10 to 14 V DC:
-red wire – 12V+
- black wire – 12V-
Output - direct 12V 20A
white wire – 12V+
Blue wire – 12V-
Time is adjusted by trimmer, with small screwdriver - rotate clockwise – increase time
Led indication for activated relay.
For safety can be placed fuse 20A at the red wire.
Please note:
- that timer will not work if power supply is below 10V
- If you set minimal time, relay will click when you power on the timer( not recommended)
- At the output have voltage, you can wire the load directly
- If you use load more than 20A, then must be used separate powerful relay after the timer.
Principe of work:
When power is on, the delay time start, led diode lights and output (white and blue wire) will receive 12V . When set time end, the relay is deactivated and output stop receiving 12V, even that power is still on. By restart power supply - cycle repeat.
Device have plastic box, as see on the picture.
Package contents:
1. Time Relay
2. Instruction for use and wiring diagram.
|