Can be used for delay off car lights and other appliance after ignition off -
The lights will remain on for the set delay time
Time delay from:
- 0.5 to 25 sec
- 0 to 90 sec
- 1 to 360 sec
- 1 to 720 sec
Choice the time of delay from drop down menu
Activating:
- negative - 12V-
- positive - 12V+
- closed contact
- positive & negative
Item Description
Dimensions of the box : 40mm/29mm/22mm
Wired with 10 cm wires:
Power: + RED, - WHITE. Have protection against reverse supply voltage.
Normally open contact - two white wires - no voltage. Must be used in circuit between load and power supply.
Normally closed contact - not soldered
Power supply - 12V DC
Relay: 20А/12V DC
20A/24V DC or AC
Time is adjusted by trimmer – rotate clockwise – decrease the delay time. Must be used small screwdriver.
Principe of work:
Modification with 12V + activating :
When 12V power is on /black and red wires the timer is in stand by mode and is ready for use. With filling a positive pulse (can be also continuous signal) at orange wire - at the activating input - the relay is activating. When the activating signal stop - the relay will remain active for the set time and then will open.
By filing new positive pulse - cycle repeat.
Operate 12V feeding need to be on all the time.
Modification with 12V - activating will be start with negative (-) 12V DC at the input - blue wire
Modification with 12V+ & 12V- activating work at same way, but is activating by 12V DC positive (+) at the input - orange wire, or negative(-) pulse at the input - blue wire.
Package contents:
1. Time Relay
2. Instruction for use and wiring diagram.