60A Solar Charge Controller MPPT 12V 24V 36V 48V Controller 60Amp Solar Charge Regulator , Max 160V PV Input, Fit for Sealed, Gel, Flooded, and Lithium Batteries
Specification
| Batteries required | No |
| Country of Origin | Switzerland |
| Item Weight | 3.98 pounds |
| Manufacturer | LAPVOC.MIX |
| Package Dimensions | 11.18 x 6.14 x 3.23 inches |
| Included Components | LCD |
6.14 inches x 11.18 inches x 3.23 inches. Weight: 3.98 lb
Item Description
- đ˛ăBATTERYă Compatible with various deep cycle battery options: Sealed, Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery , (lead-acid and lithium, User customize); Sealed, Gel, Flooded and LI (LFP) battery charging parameter pre-set, other battery can be customize charging parameter according your need , copper wires:6AWG-12AWG
- đ˛ă12V/24V/36V/48Vă MPPT 60A solar charge controller , Automatically detects 12V, 24V, 36V or 48V DC system voltages. Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%.
- đ˛ăWIDE RANGE SOLAR VOLTAGE/POWER SUPPORTăController support High PV Input Power/voltage. Controller can accept Solar voltage up to 160V. When battery is 12V system: Suggest Solar power 720W, suggest range:DC18V~DC72V ; 1440W DC36V~108V when 24V ; 2100W DC54V~144V when 36V ; 2800W DC72V~160Vwhen 48V.
- đ˛ăProtectionă Electronic protection: Overcharging, over-discharging, overload, and short circuit. Reverse protection: Any combination of solar module and battery, without causing damage to any component.
- đ˛ăNotictionăIf you use sealed lead acid, vented gel battery, and etc, you donn't need to set any parameters, the controller can adjuste automaticly and work normally; but if you use lithium batteries, you need to properly adjuste parameters according to the actual voltage of the battery, becauese the voltage of lithium batteries is unstable, such as acid battery 12V is 12V, lithium battery 12V may be 11.1V or 14.8V.
Product Description
MPPT 60A Solar Charge Controller
| Rated Current: | 60A |
| Battery Voltage: | 12V / 24V / 36V / 48V AUTO |
| Max PV Power : | 720W(12VDC) , 1440W(24VDC) , 2160W(36VDC) , 2800W(48VDC) |
| Max Solar Input Voltage: | 160V |
| Three Charging Mode: | Constand Current (mppt), Equalizing Charge, Floating Charge |
| Maximum Efficiency:tion: | âĽ99% |
| Multiple protections: | overcharge/over discharge/ overheat/reverse/overload/short-circuit protection |
| Battery Type: | Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery |
| W. | 1 year |
Multiple Battery Adaptation
Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery. User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording.
Max Input Power:
DC18V ~ DC72V (12V) 720W
DC36V ~ DC108V (24V) 1440W
DC54V ~ DC144V (36V) 2160W
DC72V ~ DC160V (48V) 2800W
LCD&LED DisplayEasy operation, details data display in real-time, | Fashion air hole designBig enough for air to go in, Fast heat dissipation can keep the solar controller in good working condition and improve power generation efficiency | High quality wiring terminalscopper wires:6AWG-12AWG copper wires:2.5mm-6mm |
TIPs:
- Always connect battery first!!! Make sure enough batteriesâ voltage let controller recognize the right system voltage. The disassembly sequence is contrary to the wiring order. NEVER connect the solar panel array to the controller without a battery
- DO NOT connect any Inverter/ wind/ Alternator or Charger into the charge controller! connect the Inverter directly to the battery.
- Ensures solar input voltage higher 3V or more than batteriesâ voltage and total input power in the range. if input power is too low for max input power, it may be appears to have been discontinued., the charging current almost be zero when controller is floating charge.
- Parameter Setting Rules: Floating voltage > Low voltage reconnect > Low voltage discharge.
- The solar controller will stop output when the battery under 10.7V. The LCD will be blank when the battery under 8V and it will re-output when the battery up to the 12.6V (adjustable).
- Install the Charger controller to the battery as close as possible. Tighten the wire, Carefully read battery manuals before operation.
- Do NOT let the positive (+) and negative (-) terminals of the battery touch each other.
Return Policy
⢠We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
⢠Returns will be voided if the product is mishandled or physical damaged by customer.
⢠Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
⢠Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
⢠All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
⢠Please contact us before returning.
Feedback
⢠We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
⢠Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.