Fast Shipping
On All Items

30 Days Money
Guarantee

Customer Support
Excellent Service

100% Satisfaction
Satisfaction Guaranteed

ECO-WORTHY Solar Submersible Pump Kit, 100W Solar Panle Kit and 12V DC Deep Well Pump-100Ft/30M

Specification

Style Submersible,Solar Water
Maximum Lifting Height 230 Feet
Power Source Solar Powered
Color 50ft Depth Solar Pump
Brand ECO-WORTHY
Material Stainless Steel, Plastic
Maximum Flow Rate 1.6 Gallons Per Minute
Voltage 12 Volts
Manufacturer ECO-WORTHY


(n/a)
 

Item Description

     

  • [ 100W BASIC SOLAR WELL PUMP KIT ] - The basic solar water pump kit, including the necessary 100W solar panel, controller and water pump,and a 16.4 inch cable.
  • [ WIDE APPLICATION ] - The all-in-one complete solar well pump system offers an ideal solution for remote watering without electric power, like the garden, farm irrigation, and tank filling, etc.
  • [ SOLAR POWERED ] - 100W solar panels can convert sunlight into direct current to directly supply water pumps or charge batteries. It can be used in any area exposed to sunlight.
  • [ IDEAL PUMPING SOLUTION FOR OFF-GRID AREA ] - After everything is set up, you can save a lot of electricity or wiring costs. You only need to keep the solar panels clean and unobstructed daily, and the maintenance cost is extremely low. It's time to say goodbye to the windmill water pump.
  • [THOUGHTFUL SERVICE] - We always put the customer in the first place, so that customer satisfaction is our mission!

Product Description

Please refer to the following pictures and descriptions.


How to Install the 100W soalr panel?

First fix the solar panel, and then install the solar panel in an unobstructed place that can be exposed to sunlight for a long time.

The best installation angle is between 25 degrees and 45 degrees.

It is a good choice to fix it on the roof or other self-made frames.

  • Installation
  • ZERO Electricity Costs
  • Clean Energy

100W Solar Panel

High Efficient Monocrystalline

  • Rated power: 100W
  • Open-Circuit Voltage (Voc): 21.6V
  • Short circuit current (Isc): 6.13A
  • Working current (Iop): 5.78A
  • Output Tolerance: ±3%
  • Temperature range: -40℃to +80℃
  • Battery Voltage: 12V
  • Size: 39.8*20.1*1.4 inch
  • Weight:18.96 pounds
  • PACKAGE INCLUDING
  • 1pc 100W Monocrystalline Solar Panel
  • 1pc 12V DC Solar Water Pump
  • 1pc 20A Charge Controller
  • 1 pair of 16.4ft Solar Cable with Connector

Easy Installation

  • Installation Tip 1: To get the largest water flow, you can use the solar panel to charge the solar pump directly, don't need to set up battery or charge controller.
  • Installation Tip 2: If you would like to set up one 12v battery for the pump kit, you need to connect the charge controller to the battery and solar panel, then connect to the solar pump.

96W Solar Deep Well Pump

  • Voltage: 12V DC
  • Amps: 8.0 Max
  • Cable Length:10ft (3m)
  • Flow Rate(lph/gph): 6L/1.6 GPM
  • Maximum Submersion: 100ft (30m)
  • Full Copper Motor

20A Solar Charge Controller

  • Battery voltage: 12V/24V AUTO
  • Charge current: 20A
  • Usb port: 5V/2A
  • Size/Weight: 138*85*30mm /150g
  • This controller can handle up to 360W (12V system) or 720W (24V system)

Nongeographic Restrictions & Wide Application - Perfect Choice for Remote Watering in Off-grid Area!

 

 

 

 

 


    Return Policy 

• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.

      Feedback

• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.