Electric Welding Gun with Welding Wire,One-Handed Operation for Soldering Circuit Boards,Electrical Maintenance,Computers and DIY
Specification
| Style | Gun |
| Power Source | Corded Electric |
| Brand | Saker |
| Wattage | 60 watts |
| Material | stainless_steel, iron, metal, plastic, tin |
| Country of Origin | China |
| Batteries Required? | No |
| Item Weight | 14.1 ounces |
| Handle Material | Stainless Steel |
| Batteries Included? | No |
| Item Length | 7.5 Inches |
| Burner type | Ceramic |
| Special Features | Electric |
| Included Components | Wire |
| Special Feature | Electric |
| Specific Uses For Product | Jewellery Soldering |
| Manufacturer | Saker |
. Weight: 14.1 oz
Item Description
- NEW DESIGN:Saker soldering iron kit the design of the side can always observe the internal operation,it is also convenient to replace the heating core in the future,stainless steel casing,anti-corrosion and more durable.
- INTEGRATED POWER SWITCH:Saker soldering has an integrated power switch,which is more energy-saving,safe to operate and use,and does not need to be plugged and unplugged frequently every time.
- EASY TO USE:When using the handheld soldering kit for the first time,it must warm up for a few minutes,it is normal to have smoke and it will disappear after a few dozen seconds. Straighten the rated tin wire, press the tin inlet, insert it from the inlet until it touches the tip of the soldering iron,stop threading until the wire is delivered to the mouth of the tin guide,then pull the trigger and it will work properly.
- ONE-HANDED OPERATION:Smart saker soldering iron kit feeds the welding wire through a stepper motor,allowing you to solder effortlessly with one hand Without feeding solder with the other hand,When it is necessary to withdraw or replace the tin wire when it is stopped,just push the plate direction upwards and take out the tin wire at the same time.
- SAFETY DESIGN:Smartsaker soldering gun uses an anti-bend tail wire to prevent the wire from bending during use,which can effectively improve the service life.Self reset ratchet trigger buckle has self reset function and good ratchet forward feeling.
- WIDE USED:Saker soldering iron widely used for welding circuit board,appliance repair,jewelry and metal headdress making,computer,and DIY.Very suitable for beginners,welders,basic household equipment,welding engineer training,etc.
Product Description
Saker Soldering Iron Kit 60W Welding Tools ,Working Voltage110V
Our electric soldering iron combination tool adopts a new tin feeding design, which is scientific in design and simple in operation
One-Hand Operation,Welding a Good Helper
1. The soldering gun is designed with a lightweight mechanism, making it easier to work.
2. High quality heating element, with longer working life.
3. The soldering iron head and heating core are easy to replace, operate and complete the welding operation.
4. The rated diameter of tin wire is 0.8~1.2mm.
5. The newly developed products have solved the trouble of changing tools for welding at different temperatures and the waste of working time, so as to better improve the working efficiency.
Saker Soldering Iron Ki
1*Solder Gun ,1*50g Tin Wire ,1* Suction Torch ,2*Anti-Static Sharp Nose Tweezers
How to Use Solder Sucker
1、Heat up solder to be removed until melted.
2、Press plunger down until a clicked sound.
3、Place the sucker next to the soldering tip and press the release button.
4、Repeat it if you need.
Performance Characteristics of Our Electric Soldering Iron
Detachable Side Door Design
The design of the side can always observe the internal operation, quick and easy to replace the heating core.
Easy to Install Tin Wire
Just pass the tin wire through the tin inlet to complete it. Suitable for tin coils with an inner diameter of 2cm and an outer diameter of 6.2cm.
Self-Resetting Trigger Buckle
This trigger buckle has a self-resetting function and a good sense of ratchet progression.
Easy to clean
Suction torch remove waste tin residue soldering iron solder desoldering aids,Curved-nose tweezers, pointed-nose tweezers grip component pins.
Matters Needing Attention
When working,the temperature of the soldering iron tip and the soldering iron tube is higher than 400 degrees.It is strictly forbidden to touch the tip and tube to avoid burns.After the work is completed,turn off the power supply and wait until it is completely cooled.
Use Scenarios of Electric Soldering Iron
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.