This is a Fixed Price listing for a case of:

Jet UV Flexo Series 

Sheet Photopolymer

LSL-114-FSS/LSL-114-UVW (0.045") 25" x 32" (635 x 815 mm)

10 sheets @ 70.00 each = $700.00 per case

FREE FREIGHT IN CONTINENTAL USA IF 3 CASES ARE PURCHASED

APPLICATION: UV Flexo: Label Printing

Specifications:

Thickness:

.045” / 1.14 mm

Face Relief:

.037” / 0.93 mm ▪ PVA (Polyvinyl Alcohol)

Substrate:

.008” / 0.21 mm ▪ Film Base

Durometer:

30° Shore D Hardness

Surface Texture:

Matte

Processing:

Main Exposure:

2:30 - 5:00 Minutes @ 720 mj/cm (350 nm)

Shoulder Angle:

25 - 30°

Resolution (inches/inches):

150 @ 3%

Minimum Isolated Dot (um):

200

Maximum Isolated Dot (um):

40

21 Step Exposure Scale:

16-19

Washout:

< 7:00 Minute

Bath Temperature:

< 23° C / 72° F

Dry:

20:00 - 30:00 Minutes in Convection Dryer


Temperature:

65O C / 149O F

Post Exposure:

< 6:00 Minutes

Effluent Data:

.0025 Square Meter of Jet Letterpress Series Plate in ONE LITER of water.


PH = 6.0

COD = 1941

BOD = 44 Biochemical Demand


Unit

MG / LITER

Unit

MG / LITER

F - Fluoride

Less than 0.1

Cu - Copper

0.07

Hq - Mercury

Less than 0.0005

Zn - Zinc

0.04

Co - Cobalt

Less than 0.01

Mn - Manganese

Less than 0.01

Pb - Lead

Less than 0.05



Note:    You may filter waste water before discharging into local sewer. Use a Sub-Micron mesh filter. Dry filtered waste and dispose in refuse. Consult Local Authorities for Regulations in your Area.


Shipping Policy: All items will ship the next business day after receipt of funds. Jet USA may substitute delivery via parcel carrier to LTL carriers without notice to assure the product reaches the buyer via the safest means possible. This can be typical with multi-case orders.







Product Disclaimer: The information contained is considered accurate. However, No warranty is expressed or implied. Manufacturers will only warranty the replacement of actual product. It is the responsibility of the user to test all products for acceptable results prior to actual production. Product satisfaction must be determined within 5 linear feet of first box. Contact us via the contact information from your invoice for a RMA number prior to returning.

Warranty Disclaimer: The materials and products on this sale site are provided ?as is" and without warranties of any kind, whether express or implied. To the fullest extent permissible pursuant to applicable law, Jet USA Corporation disclaims all warranties, express or implied, including, but not limited to, implied warranties of merchant ability and fitness for a particular purpose and non-infringement. Jet USA Corporation does not represent or warrant that the functions contained in the site will be uninterrupted or error-free, that the defects will be corrected, or that this site or the server that makes the site available are free of viruses or other harmful components. Jet USA Corporation, does not make any warranties or representations regarding the use of the materials in this sale site in terms of their correctness, accuracy, adequacy, usefulness, timeliness, reliability or otherwise. Some states do not permit limitations or exclusions on warranties, so the above limitations may not apply to you.

Limitation of Liability: Jet USA Corporation shall not be liable for any special or consequential damages that result from the use of, or the inability to use, the materials on this site or the performance of the products, even if Jet USA Corporation has been advised of the possibility of such damages. Applicable law may not allow the limitation of exclusion of liability or incidental or consequential damages, so the above limitation or exclusion may not apply to you.