Product Description



More  than 20 Years in  the industry with excellent customer service. LA Cutting Products weld center  has what you are looking for!

Don't  see what you are looking for contact  us and we will send you an updated quote for what you need.

Every  blade is Made To Order with capabilities up to 2" width! Check out the  store below for some more great deals!



    

                        

          ​     http://stores.ebay.com/lacuttingproducts/Carbon-Wood-Blades-/_i.html?_fsub=1604579119


 

Terms and Conditions.

!!!!NOTICE!!!!
Up to 20% Re-Stocking Fee may apply! We Custom Make these blades to the specs you order. If any of the following apply a Re-Stocking fee may apply.

1) Product Matches Description

2) In proper use of the product. (Example the blade is what ordered and you cut 1/2" steel with a 14/18 or 18 and tell us the product doesn't work cause the teeth stripped. this is improper use! Recommended blade 8/12.

3) Item comes back damaged due to in proper coiling.

4) Product is used and or is not reusable/ resealable. 

IF YOU ARE DOUBTFUL ON WHAT PRODUCT TO GO WITH, PLEASE REACH OUT TO US!!!!!

  • Once a bid has been placed it is a legally binding contract of purchase. 
  • Payment must be received immediately of purchase.  However, larger volume  customers may contact us for specific terms. 
  • LA Cutting will notify you via e-mail when your goods have been shipped,  along with tracking information. 
  • Once you receive your goods, please inspect them for any damage during  transit.  If all is well, please leave Positive Feedback with 5 star ratings so  we are aware that you have received your goods. Please Note: to report  damage, notify us within 24 hours via e-mail by contacting LA Cutting  directly with your User ID and full details of the problem with a couple of  photos.
  • LA Cutting ships via Federal Express Ground and U.S. Postal Service. 
  • We accept no responsibility for goods delayed due to the services of the  carrier. 
  • Goods will be dispatched within 1-2 business days of cleared fund. 
  • Band saw blades are made to order as specified above. Should there be any   issues with the blade or shipment, please e-mail LA Cutting Products with your  User ID and a description of your concern, along with a couple of photos. 
  • LA Cutting Products guarantees its welds  100%.

Always double check your machines blades specs!

 

NOTE:

The owner's manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc.

Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) this is not slow enough (40 to 300 fpm) for cutting ferrous metals (like steel).

Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced due to the speed. Bi-Metal bandsaw blades can cut all types of woods and are especially ideal for hard woods, like oak, maple, walnut or cherry.

Bi-Metal bandsaw blades are also most commonly used for metal cutting, like carbon steels, light alloy steels, mold steels, and tool steels.

Below is a helpful guide to picking the best blade for your needs.

1/4" Blades

General Purpose Cutting = 10/14N

Larger Materials = 6H

Tubing = 10/14N

 

1/2", 3/8" Blades

General Purpose Cutting = 8/12

Small Thinner Materials = 10/14

Larger Materials = 6/10

Tubing = 8/12

 

3/4" Blades

General Purpose Cutting = 8/12

Small Thinner Materials = 10/14

Larger Materials = 6/10 - 5/8

Tubing = 8/12 - 6/10

 

1" Blades

General Purpose Cutting = 5/8

Small Thinner Materials = 10/14

Larger Materials = 4/6

Tubing = 8/12 - 6/10