Set includes:

(1) 8” x 20” x 3/8" AR500 Popper Body

(1) 3/8" AR500 Slotted Stake Stand w/ Side Guides

(1) Perpendicular Stake Stand Support

(2) 1/2" Carriage Bolts

(2) Compression Springs

(2) 1/2" Lock Nuts



- This simple, robust design is quick and easy to setup. Within a couple minutes you're ready for multiple hours of fun/training at the range.

- Springs, bolts, and lock nuts come unassembled. Reference images 5 and 6 for assembly. 3/4" socket using drill or impact is recommended but not required.

- Side stand guides should be between half way and flush with the front side of the popper body. These keep the target body straight up and down after multiple impacts.

- Using a hammer, the flat 3/8" AR500 stake top allows for easy installation into the ground. Reference images 7 and 8.

- Perpendicular stake stand support adds extra rigidity in the ground for longer range use and less maintenance.

- Compression springs maintain consistent bullet deflection downward away from the shooter and others.

- Target and stake stand come finished and not painted.



- These AR500 steel targets are great for most pistol and rifle calibers, including 9mm, 45ACP, .223, 30-06 & 308 as well as most other high powered rifle calibers. Three eighths inch thick AR500 steel targets are rated to 3200 fps at 100 yards.

- This target and stand are manufactured from new high quality 3/8 inch thick AR500 steel plate made in the USA.

- These products are precision cut with a CNC plasma cutter and submersion water cooled during the cutting process ensuring the longest life.

- Reversible steel target face doubles the life of the shooting target.



Warning

- Shooter and spectators must always wear proper eye and hearing protection.

- Recommended minimum distances from steel targets to shooter are 15 yards for pistols and 100 yards for rifles.

- If using non-frangible ammunition use handgun ammunition with a maximum velocity of 1500 feet per second. Rifle ammunition muzzle velocity should not exceed 3,000 feet per second.

- No shotgun slugs, steel birdshot and buckshot ammunition can be shot at steel targets.

- Never shoot hardened, steel core or armor piercing ammunition at any steel target.



Disclaimer

-Buyer assumes all responsibility for the use and misuse of the targets purchased.