6 Pcs Max4466 Electret Microphone Amplifier Module Blue Board Breakout

Using introduction: Connect GND to ground, VCC to 2.4-5VDC. The audio waveform will come out of the OUT pin. The output will have a DC bias of VCC/2 so when its perfectly quiet, the voltage will be a steady VCC/2 volts (it is DC coupled). If the audio equipment you're using requires AC coupled audio, place a 100uF capacitor between the output pin and the input of your device. If you're connecting to an audio amplifier that has differential inputs or includes decoupling capacitors, the 100uF cap is not required. The output pin is not designed to drive speakers or anything but the smallest in-ear headphones- you'll need an audio amplifier (such as 3.7W stereo amp) If you want to connect the amp directly to speakers. If you're connecting to a microcontroller pin, you don't need an amplifier or decoupling capacitor - connect the OUT pin directly to the microcontroller ADC pin. For audio-reactive projects, we suggest using an FFT driver library which can take the audio input and 'translate' it into frequencies. Package Included: 2* MAX4466 Electret Microphone Amplifier Module

Product Features

  • Application scenarios: cellular phones, repeating sound device, earphones, hearing aids, microphone preamplifiers, portable computers, voice recognition systems, etc.
  • This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on.
  • Easy to use:The board comes with a 20-20KHz electret microphone soldered on Using the MAX4466, an op-amp specifically designed for amplifier; for the best performance, use the "quietest" supply available (on an for Arduino, this would be the 3.3V supply);the amplifier has excellent power supply noise rejection
  • Parameters: power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100kΩ) rail-to-rail output; Quiescent power supply current: <24μA; Gain bandwidth: 600kHz Size:20.8MM*13.8MM*7.5MM
  • This breakout board is best used for projects such as voice changers, audio recordingmpling, and audio-reactive or DIY projects that use FFT



Shipping:

Shipping is complimentary within the lower 48 US States.

  • We Do Not Ship to PO/APO Boxes, HI or Alaska
  • We Do Not Ship Outside of the Continental US
  • All items ship within 24-72 hours of Payment
  • For large items that require Freight shipping a valid phone number is required to call and schedule your delivery

Terms of Sale and Feedback:

  • Feedback is extremely important to us and
  • If you are satisfied with our transaction, please take a moment to leave Positive Feedback. YOUR Satisfaction is our #1 Priority!
  • If there are any issues, PLEASE contact us BEFORE leaving a neutral or negative rating so that we may resolve any concerns.
  • We PROMISE we can make you happy if you give us a fair chance.

Returns / Concerns:

  • All items qualify for returns within 14 - 30 days of receipt. Buyer is responsible for return shipping on any item that is not damaged
  • Please be sure this is an item you want before making your purchase. Customer Satisfaction is our TOP priority!
  • All items are IN STOCK at time of listing.
  • Inventory changes constantly and it is impossible to maintain a perfectly accurate count of all items.
  • Please do not penalize us if we have to issue you a refund!


Thank You For Your Business!