ELECTRONIC STAR FOR MERCEDES BENZ
REMOTE CONTROL
MERCEDES BENZ OFFICIAL PRODUCT
VALID FOR ALL MODELS THAT HAVE THE HOLE FOR THE STAR ON THE HOOD
THIS IS AN OFFICIAL MERCEDES BENZ PRODUCT OF HIGH QUALITY
-TESTED AT LOW AND HIGH TEMPERATURES
-TESTING AGAINST IMPACTS
CONSISTS OF AN ELECTRONIC STAR (WORLDWIDE PATENTED) FOR AUTOMATIC LIFTING AND RETRACTION THROUGH THE REMOTE CONTROL (INCLUDED)
ITS FUNCTION IS NOT ONLY TO HANDLE ITS THEFT OR BREAKAGE WHEN THE VEHICLE IS PARKED, BUT IT GIVES THE VEHICLE A UNIQUE ELEGANCE AND DISTINCTION.
Said device has an extreme quality and is difficult to beat. The chrome is accompanied by a certificate of the highest quality. The device is fully waterproofed against moisture and dust, the highest risk parts being made of stainless steel.
The electronic part is protected against overloads and high temperatures. It is easily installed in the same housing of the original star of the vehicle in a few minutes without any modification of the hood.
Description:
Electronic folding star with remote control valid for any model that has the hole in the hood.
Assembly instructions: (Video)
1.- Insert the star assembly (with its adapter) through the hole in the hood where the original star was installed and fixing it from below with the plate and the nut.
2.- Couple and fix the electronic control unit in an appropriate place.
3.- Connect the 2 brown wires from the electronic control unit to the 2 brown wires from the star motor.
4.- Connect the red cable to the positive and the black to the negative of the car battery.
Technical characteristics:
Power 12 Volts
Consumption in standby 5mA
Consumption in work 200 mA
Waterproof Yes
Box contents:
Electronic star
Electronic control unit with remote control and complete wiring
Assembly instructions
This electronic device is built with the best materials:
- The main body: Made of alloy metallic Zamac, like the original star, covered in several layers.
- Quality guarantee with engines tested for 5,000 hours of operation and sealed in their compartment to make them watertight.
- Sealed bearings with double rubber protection and made entirely of stainless steel. They work dry.
- Worm shaft and crown made of stainless steel
- External mechanism sealed around the protection ball with silicone gasket pressed by two stainless steel gaskets for adjustment.
- Electronic control unit: Receiver module equipped with consumption protection for motor care.
- Transmitter control: Frequency 433 Mhz with 12v battery.
- High quality cables that withstand a temperature of up to 160 degrees and 300v.
- 2 years warranty
IF YOU ARE NOT SATISFIED WE GIVE YOU BACK YOUR MONEY