APPLICATION:

• Type: Type L
• Regulators Body: Aluminium
• Surface Finish: Hard Anodized
• Weight (with Bracket): 270g
• Diaphragm Diameter: 50
• Vacuum Hose Nipple: 4.5
• Fitting Parts: AN6 1/8NPT x2 / #8 Straight 1/8NPT x2
• Pressure Adjust ability: 2.0kgf/cm⊃2;-8.0kgf/cm⊃2;

INSTALLATION
1.select the appropriate fittings or nipple for the job prior to commencing with the job, have the required accessories handy for installing the regulator .
2.if you will connect the fuel pressure gauge to the screw plug on the fuel pressure regulator , it is best to wrap the screw with the Te-fl-on tape to properly seal the screw.
3.THE MOUNTING BRACKET IS THEN used to mount the regulator in the car.
4. connect the fuel piping connections.
STAND COLOR: same as the picture
specification :SAME AS THE PICTURE

Package Includes:
1 Set X Fuel Pressure Regulator
(same as the picture)