Many companies and homeowners choose to go with an epoxy flake system because of its invaluable ability to hide stains and dirt. 

This in combination with it's extreme durability make it ideal for high foot-traffic areas or just about any flooring surface that will be subject to constant wear and tear. Keeping a good sacrificial coat of wax or recoated clear epoxy is very important to keep this floor looking it's best at all times. 

The relative ease with which Epoxy Flake coatings are applied allows for this system to be applied, not just by seasoned professional decorative contractors, but also homeowners and DIY weekend warriors.

May be applied for garage floors, commercial kitchens, locker rooms, sports venues, automotive showrooms, veterinarian clinics, laundromats, or anywhere that an exceedingly resilient floor is required.

Binder coats may be either Dura-Kote Pigmented Epoxy 100, Dura-Kote Pigmented Epoxy WB, or Dura-Kote PFC 120, Complementary Binder Coat colors are suggested with Dura-Kote Flakes, or any of the 100’s of colors available may be selected. Some applicators may elect to use Dura-Kote Pigmented Epoxy WB for its simplicity in placement and increased square footage coverage, as it is applied in a thinner millage

PACKAGING 25 lb. (11.34 kg) box. Available 12 colors. 

COVERAGE approximately 125 – 175 ft2 (11.6 – 16.3 m2) per box

Binder Coat:

Dura-Kote Water Based Pigmented Epoxy Coating (1 Gal Kit) 

 OR

Dura-Kote PFC 280

Top (Flake) coat:

 

Broadcasting

Floor drying / cure sufficiently, usually takes 8 – 10 hours

Full coverage = approximately 125 – 175 ft² (11.6 – 16.3 m²) per box

Finish Coat

• Dura-Kote PFC 120 or Dura-Kote Polyurethane WB

Optional: SureGrip (Non Slip Sealer Additive HD)

If you'll order shipping calculator 

Vinyl Flakes, vinyl chips, epoxy primer, colored flakes, colored chips, epoxy flake floors, surecrete design products, epoxy garage floor. Dura-kote, epoxy, solids epoxy, clear epoxy, polyaspartic system, durakote, pigmented epoxy, surecrete epoxy, garage