When the star projection lamp is used for 2-3 hours, the internal temperature of the machine is too high, which will cause the color change of the disk under high temperature, but only the galaxy disk will not change color. Please change a film about 2-3 hours after use or let the machine rest for heat dissipation to avoid the color change of the disk due to high temperature.


One discks should not be used continuously for more than 3 hours, otherwise it may be damaged because of the temperature rise.

 
Product Name:  Focusing Projector Night Light
Product Model:  DT01-1
Power Supply: DC/5V
Maximum Power: 4W
Product Size: 121*120*112mm
 

Button fuction Introduction:

1.Twist it to adjust the focus sharpness.
2.Short press the first button to power on (default function is
fully on) and long press it for two seconds to power off.
3.Short press the 2nd button to turn on/off the focus light.
4.Short press the 3rd button to switch the side projection mode.
Long press for 2 seconds to adjust its brightness (high,
medium, low) in three modes.
5.Short press the 4th button to turn it on/off and control the
rotation of the film, longpress for 2 seconds to time it on/off
(fixed time is one hour, while the green light is on)
Warm Tips: The product is not include Battery, pls kindly plugged in when using it, Thank you.
 
 






1 x Galaxy Projector Night Lights
1 x USB cable
1 x User Manual
6 x Set Films/ 7 x Set Films

6 IN 1 projector has 6 films,     7 IN 1 projector has 7 films.

(Note: One film sheet is already in the reel.)