Inline Dimmer Cord Switch - Leviton Brand Full Range Lamp Dimmer, Rotary Knob, Feed Trhu

Brown or Ivory (Beige), Great with Cloth Wire - 2-wire cords only!!!!

Leviton Inline switches are durable and dependable, and are the top of the line as far as dimmer switches are concerned. What sets them apart? 1) Smooth function: steady increases and decrease of the light output. 2) Full range: these will get your bulb as low and as high is it is capable of. 3) Consistent output: cheap dimmers are known for flickering and flashing, these dimmers will work beautifully. 4) Longevity: Look inside the dimmer, there's a lot going on in there! Don't wast time with cheap dimmers that will fail or fry up in a short period of time.

Dimmer function: Yes these will also turn the bulb on and off! Rotation starts in the "off" position, as you turn it clockwise it clicks "on", and then you have the ability to rotate the dial to your desired brightness level. These dimmers are designed for incandescent bulbs, but generally LED bulbs marked "dimmable" will work with these too. All of our bulbs work well with these dimmers (both incandescent filament and LED).

Feed through switches are easy to work with: The shell unscrews with 2 screws. Your cord (make sure you have no power going to it!) will have 2 wires, the "neutral" wire will bypass the switch, just run it along the space in the bottom. Cut your "hot" wire in half, strip your ends (we recommend a small piece of electrical tape when using our cloth wire), and attach one end of your "hot" wire to one screw terminal, and attach the other end to the other.

This listing is for the Leviton Dimmer switch only (a quantity of 1 = 1 switch!!! Wire shown as an example, can be purchased separately!!!)

• UL Listed
• Top Quality Leviton Brand Model 6250
• 200 Watt max, 120volt AC
• 3" X 1-3/8" x 1-3/8"
• Works with all of our 2-wire cloth covered electrical wire (twisted and parallel flat wire)
• These DO NOT WORK with our round or 3-wire cords!