About the Product:
TRM Self-Regulating outside electrical wire is the industry standard for most heated roof cable applications and water pipes deicing. Heated gutter wires are flexible and easy to install. Each TRM roof de icing cable has a semi-conductor core that regulates its heat output. This technology allows each of these heating cables to adjust their wattage. The heat output is based on the temperature to which the rain gutter deicer cable is exposed. In cold conditions, radiant solutions heat tape (roof melt cable) generates more heat. In warmer conditions, the output of the rain gutter heater cable is reduced to save energy.
This also helps make TRM roof ice melt cable one of the safest snow melt cable solutions on the market. Unlike cheap heated wire for pipes and outdoor use, TRM roof warmer cables can be overlapped and crossed over themselves. The wattage of the deicing roof cable can vary along the cable’s entire length. If the roof deicer cable is exposed to a warm ambient, it will automatically adjust its heat output in certain spots. This will let it avoid overheating.
The roof heating cable for ice dams can function safely without the use of controls. 120V cable is designed to be simply plugged into a standard wall outlet (240V cable has a hard-wired connection). You can utilize thermostats or controllers (as a roof deicing cable kit or ice melting kit) to maximize the efficiency of the ice melting wire.
The TRM heat wire for gutters, downspout, and other roof applications is designed for both commercial and residential use. It has an inner insulation jacket and an exterior fluoropolymer jacket, providing more durability than most gutter ice melt cable models.
The TRM (Thermal Resources Management) cables can be used for in-pipe heat tracing of potable water lines and hot water temperature maintenance. They can also be a part of a Heat Loss Replacement System (wall heating) for balconies, carports, and living areas above unheated locations (mechanical room, stairwell, parking garage).