A polacre is a type of seventeenth- to nineteenth-century sailing vessel, similar to the xebec. The name is the feminine of "Polish" in the Italian language. The polacre was frequently seen in the Mediterranean. It had two or three single-pole masts, the three-masted vessels often with a lateen hoisted on the foremast (which was slanted forward to accommodate the large lateen yard) and a gaff or lateen on the mizzen mast. The mainmast was square-rigged after the European style. Special polacres were used by Murat Reis, whose ships had lateen sails in front and fore-and-aft rig behind. This type of ship was used by the Tripoli pirates.

This model is 3D printed and meant to be an economical alternative to wargamers wanting to expand their armies, it can also be used to build dioramas.

This model is made in eight parts, hull and masts. The model will be sent with support material still attached for better safety during transport, cutting and cleaning will be needed before assembly. The model is printed using PLA, if adding accessories to it superglue type glue will be required or other epoxy glue.

The pictures are from one sample model, the models are similar in grade of detail and after print cleaning. The model is dispatched in a postal cardboard box with protective material inside for better safety.

Model Specifications:
Length - 8.43 cm
Width - 2.5 cm
Height - 4.56 cm
Weight - 4 g
Color - color may vary but it is usually grey, white or brown.

Please check the detailed pictures! All parts are FDM printed! All miniatures must be cleaned with a cutter so require further cleaning before painting.

Items are made to order and are usually dispatched up to two weeks after payment.

Shipping for one item will be 8.60 USD

Combined Shipping will be:

Up to 100g - 6.75 USD

From 100g to 250g - 8.60 USD

From 250g to 500g - 12.80 USD

From 500g to 1000g - 23 USD