Scale Buildup On Hot Water Heaters And Boilers Is Prevented By The 3M Aqua-Pure

The 3M Aqua-Pure whole house scale inhibition inline water system AP430SS is designed to help reduce scale build-up and corrosion - thereby helping to extend the life on hot water-using appliances such as water heaters (standard (gas or electric) and tank-less), boilers, clothes washers and dishwashing machines, and on plumbing fixtures like faucets, pipes, and shower heads. The AP430SS provides a flow of up to 10 GPM with ¾” NPT inlet/outlet connections. Scale is calcium and magnesium deposits that often form when hard water is heated. Water hardness is responsible for most scale formation in pipes, water heaters, finishes and flat surfaces, and other water using appliances. Over the time scale build-up can significantly shorten the life of any water-using appliance. Also scale buildup inside pipes causes loss of water pressure as the interior gets smaller and smaller over time. The AP430SS contains polyphosphates to bind calcium and magnesium hardness minerals, helping to prevent them from precipitating out (or becoming a solid) and building up on metallic surfaces. Polyphosphates also helps prevent corrosion by forming a thin protective layer on the metal surface. The 3M Scale Inhibition Water System AP430SS is tested by NSF International to NSF/ANSI Std. 42 for material and structural requirements only. The overall single vessel/cartridge design of the AP430SS makes the 3M Aqua-Pure AP431 Water Filter Cartridge change-out easy for professionals as well as end users. Change disposable filter cartridge every 6 months or sooner if you observe noticeable reduction in water flow rate. The AP430SS is to be installed on the cold water supply line of the water heater or at point-of-entry of water into the home. Tools and parts required (not included): one ¾” stop and waste valve (compression type), PTFE tape, two ¾” male x ¾” street adapters, one ¾” compression gate valve, and pipe cutter. Read all instructions carefully before attempting to start installation. The existing shut-off valve remains in place and still acts as the cold water shut-off. This filter system has 3/4” connections. The AP430SS can be adapted to various pipe sizes by using reducing adapter on either end. Installation fittings can be sweated or threaded. Use galvanized fittings for installation of galvanized pipe. Aquapure by Cuno hot water system protector to reduce scale build up in pipes and extend life of water heater. Installs on cold water side of hot water system to inhibit scaling and corrosion.

Product Features

  • Helps Protect Hot Water Heaters: Polyphosphates, Included In This Product, Help To Inhibit Scale Build Up In Hot Water Heaters (Both Standard (Gas Or Electric) And Tank Less Styles) And Boilers; Helps Extend The Life Of Hot Water Heaters And Hot Water Using Appliances, Pipes, And Downstream Plumbing Fixtures Such As Faucets And Shower Heads
  • Maintains Efficiency: By Inhibiting Scale Build Up On Heating Elements, Helps Maintain Water Heater Efficiency
  • Easy To Replace: Easy Change Out Of The 3M Aqua-Pure Ap431 Replacement Water Cartridge Makes System Maintenance Easier
  • High Flow Rates: 3/4 Inch Npt Inlet/Outlet Connections For Easy Installation And High Flow Rates (Rated For Up To 10 Gpm); System To Be Installed On Cold Water Line Feeding The Water Heater



Shipping:

Shipping is complimentary within the lower 48 US States.

  • We Do Not Ship to PO/APO Boxes, HI or Alaska
  • We Do Not Ship Outside of the Continental US
  • All items ship within 24-72 hours of Payment
  • For large items that require Freight shipping a valid phone number is required to call and schedule your delivery

Terms of Sale and Feedback:

  • Feedback is extremely important to us and
  • If you are satisfied with our transaction, please take a moment to leave Positive Feedback. YOUR Satisfaction is our #1 Priority!
  • If there are any issues, PLEASE contact us BEFORE leaving a neutral or negative rating so that we may resolve any concerns.
  • We PROMISE we can make you happy if you give us a fair chance.

Returns / Concerns:

  • All items qualify for returns within 14 - 30 days of receipt. Buyer is responsible for return shipping on any item that is not damaged
  • Please be sure this is an item you want before making your purchase. Customer Satisfaction is our TOP priority!
  • All items are IN STOCK at time of listing.
  • Inventory changes constantly and it is impossible to maintain a perfectly accurate count of all items.
  • Please do not penalize us if we have to issue you a refund!


Thank You For Your Business!