|
Electromagnetic Vibrating Feeder Shaking Feeding Machine 110V/220V |
 |
| Product Overview |
| Micro electromagnetic vibrating feeder is widely used in various industries such as light industry, chemical industry, food, food, grinding, etc. It is used in the feeding, batching and quantitative automatic packaging of powder and granular materials, and can realize the production process. centralized control and automatic control. |
| Need to know before buying!! |
| ①This machine can use
both 110V single-phase power supply and 220V single-phase power
supply. ②In the case of 220V power supply, the material handling efficiency of the machine is about twice that of 110V power supply. ③The controller must be set to E50 to work properly, please do not set to E100! ④Be sure to install the four rubber foot pads before use, otherwise it will affect the efficiency of material handling. |
| Product Parameters |
| Model: | GZV-3 |
| Voltage: | Both AC110V and AC220V are available |
| Power: | 30W |
| Production capacity: | About a ton per hour(220V voltage condition) |
| Vibration frequency: | 3000/3600 beats per minute(Low and high frequency) |
| Amplitude: | 0.06"(1.5mm) |
| Package size: | 21.3"*6.3"*11.0"(54cm*16cm*28cm) |
| Net weight/Gross weight: | 27.8LB(12.6kg)/28.9LB(13.1kg) |
|
The dimensions of other models are as shown in the picture below, if you need other models, please contact us. |
|
 |
| Product Features & Advantages |
 |
Thicken the Base The base has been
thickened
|
|
Shock Absorber The two shock
absorbers before |
 |
 |
Rubber Mat The bottom of the
machine has 4 |
|
Feeding Chute 15.7”x
3.1”oversized feeding |
 |
 |
Electromagnet The electromagnet
adopts high- |
|
Control Unit The control unit
has two gears of |
 |
| - Small size, light weight, reasonable
center of gravity, simple structure, convenient installation and
maintenance. - The material flow can be changed and opened and closed instantaneously, so the feeding precision is high. - Using the resonance principle, the double mass works in a low critical near-resonance state, so the power consumption is low. - Using thyristor half-wave rectifier circuit, the feeding amount can be adjusted steplessly. - Since the material in the feeding trough is in a jumping motion, the wear on the feeding trough is very small. - This series of feeders are not suitable for materials above 300°C and places with explosion-proof requirements. |
| Product Presentation & Details |
 |
 |
| Item Included(028174) |
| GZV-3 feeding machine *1 | Control unit *1 | Power cord *1 |
|
You can
make order with no worry. |