|
WM210V Inch Precision Metal Bench Lathe 8"*32" 900W |
| Product Overview |
| Miniature lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies.For example, turning inside and outside cylindrical surface, cone surface, ring groove and forming turning surface, turning end face and all kinds of commonly used metric thread, cone surface, ring groove and forming turning surface, turning end face and all kinds of commonly used metric thread. |
| Product Parameters |
| Motor: | 110V brushless motor |
| Voltage: | AC110V 50/60Hz |
| Power: | 900W |
| Length of center: | 31.5"(800mm) |
| Swing Over Bed: | 8.3"(210mm) |
| Rotary diameter of tool rest: | 5.51"(140mm) |
| Spindle bore: | 1.50"(38mm) |
| Diameter of chuck: | 4.92"(125mm) |
| Width of lathe bed: | 3.94"(100mm) |
| Number of Spindle Speeds: | Infinitely variable speeds |
| Spindle taper: | MT5 |
| Knife rest labour: | Horizontal four-station |
| Spindle rotation speed: | 50-2500rpm |
| Range of Inch Threads(optional accessory ): | 10-44T.P.I |
| Precision of the spindle: | 0.01mm |
| Automatic feed range: | 0.1mm-0.2mm |
| Maximum stroke of tool rest plate: | 2.16"(55mm) |
| Maximum stroke of middle plate: | 2.95"(75mm) |
| Maximum stroke of bottom plate: | 26.8"(680mm) |
| Maximum stroke of tailstock sleeve: | 2.36"(60mm) |
| Tail frame taper: | MT2 |
| Lathe sizes: | 45.7"*13.0"*13.4"(116*33*34cm) |
| Package size: | 49.2"*18.9"*17.7"(125*48*45cm) |
| Gross weight: | 183lb(83kg) |
|
Note:*We provide optional parts for this lathe. If you need, please contact us*. |
|
| Product Features & Advantages |
| - High quality cast iron bed after
high frequency quenching process and precision grinding - The spindle rotation speed is divided into two levels in the range of 50-2500rpm, which can be adjusted continuously - Brushless motor has strong power, low noise and saves energy consumption - High precision spindle, high quality bearing, high accuracy, wear resistance, long life - With one button start and stop switch and forward and reverse switch |
| Product Presentation & Details |
| Item Included（028032) |
| WM210V lathe * 1 | Chuck Jaw * 3 | The Screwdriver * 2 |
| Open spanner *2 | Hexagon Wrench *5 | Chuck Spanner *1 |
| Oil can * 1 | Oil pan * 1 | Gear *11 (75/72/70/66/60/60/52/50/48/40/30) |
| The Fuse * 1 | English Instruction Manual *1 |